1. DL manuals
  2. KAM
  3. Lighting Equipment
  4. iLINK GREEN
  5. Instruction Manual

KAM iLINK GREEN Instruction Manual

Summary of iLINK GREEN

  • Page 1

    Ilink green linkable green dmx laser with remote control green dmx laser with remote control part of the kam ilink laser series stepping motor full remote control full dmx512 operation 8 dmx channels auto mode / sound-to-light via built-in mic master/slave modes led display tough metal chassis / adj...

  • Page 2

    Thank you for purchasing this kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, ...

  • Page 3

    Panel no. Name description 1 power led indicates the laser is switched on 2 music led sound-to-light signal 3 ir receiver remote controller signal receiver 4 laser aperture the laser effect output aperture. Never look inside the fixture through this aperture while fixture is operating. 4 power switc...

  • Page 4

    Control & function regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use. Always unplug the unit when it is not being used for long periods or before servicing. In the event of serious operation problems, stop using the unit and con...

  • Page 5

    Sound activated mode sensitivity setting press func till to see s **. Press up/down to set microphone sensitivity. S 0 is no sound activation, from s1 to s9 is sound activated, s1 min s9 max. Press enter to confirm and save the setting. The sound sensitivity can be adjusted to determine how sensitiv...

  • Page 6

    Remote mode press func to enter mode option. Until the led panel shows ren press enter to confirm the setting. Remote instructions button function description on/off in rem mode, to turn on/off laser. In any stand alone mode, except for sla mode, pressing this button for 2 seconds will activate the ...

  • Page 7

    Controlling units via dmx - each unit uses 8 dmx channels to set the dmx address 1. Press the function button until *** is displayed (range 001-512) 2. Using the up / down buttons select the desired dmx staring address 3. Press the enter button to confirm 4. Continue this formula to address any addi...

  • Page 8

    Pattern list in channel 2 dmx patterns dmx patterns dmx patterns dmx patterns 000-007 064-071 128-135 192-199 008-015 072-079 136-143 200-207 016-023 080-087 144-151 208-215 024-031 088-095 152-159 216-223 032-039 096-103 160-167 224-231 040-047 104-111 168-175 232-239 048-055 112-119 176-183 240-24...