KAM KAP1010 Instruction Manual - page 4
CROSSFADE ASSIGN
(13) To the left and right of the crossfader is a crossfade assign knob, which has an off position and selections 1-4. This control is
designed to assign the crossfade position to the appropriate channel. Crossfaders are generally not guaranteed and are a
Chargeable item.
HEADPHONES
(14) Headphone socket, connect the headphone to this socket to monitor the audio output of selected channels.
MICROPHONE INPUT (15)
GRAPHIC EQ (16)
SPECIFICATION
Input sensitivity
Phono 1 & 2
3mv
Mic
1.5 mv
Line / CD
150mv
Impedance
Phono 1&2
47 KOhms
Mic
600 ohm
Line / CD
47 KOhms
Output level
1.V
Harmonic distortion
< 0.1%
Frequency response 20hz – 20 khz +/- 2db
S/N ratio
>58 db
Headphone output
1.5v max / 16ohm
Power source
230v 50hz
Dimensions
482mm x 177mm x 105mm
Inputs
2 phono + 8 line + 1 mic
4 channel + mic input format
Mic input
Combi XLR / jack microphone input
Microphone
Mic level control with 2 band EQ
Metering
7 point LED level meters
Equalisation
5 band master graphic EQ
Crossfader
Assignable
Faders
Master level fader & 50mm channel faders
Outputs
Record & master outputs
Dimensions
482 x 90 x 78mm (WxHxD)