KAM KMD14.2 Instruction Manual - page 5
(33) DIGITAL EFFECTS PROCESSOR
99 Effects (for details see table at the end of the manual)
01 – 08 Reverb Hall
09 – 14 Reverb Room
15 – 20 Reverb Plate
21 – 25 Ambient
26 – 31 Gated Reverb
32 – 37 Reverse Reverb
38 – 45 Echo & Room/Hall
46 – 50 Voice Doubler
51 – 58 Single Delay
59 – 69 Echo 50% F.B.
70 – 78 Chorus
79 – 87 Flanger
88 – 93 Tremolo
94 – 99 Wah Wah
(34) SEVEN BAND GRAPHIC EQ Adjusts input sensitivity from-10dB to +10dB at the following frequencies: 60Hz, 160Hz,
410Hz, 1.1KHz, 2.3KHz, 6.2KHz and 15.6KHz.
(35) EQ IN Releases the output signal from equalisation.
(36) AUX SENDS GAIN CONTROL You can have a further +15dB available from these outputs.
(37) FX SENDS GAIN CONTROL Gives a further +15dB from the FX sends.
(38) AUX PFL / (39) FX PFL
(40) AUX OUTPUT CONTROL Adjusts the output level from AUX.
(41) FX OUTPUT CONTROL Adjusts the output level of FX.
(42) ALT 3-4 OUTPUT LEVEL CONTROL Controls the ALT 3-4 signal.
(43) & (44) L R MASTER OUTPUT CONTROL Controls the Left and Right signals.
(45) 2-TRACK INPUT
(46) ALT3-4 OUTPUT PF
(47) ALT3-4 BUS L
(48) HEADPHONE VOLUME CONTROL Controls the output level of headphone and monitors the signals reverb from speaker.
(49) 2-TRACK OUTPUT
(50) MAIN MIX
(51) ALT3-4 OUTPUT PFL
(52) PFL/SOLO
(53) OUTPUT LEVEL DISPLAY AND WORKING INDICATOR You can choose the master channel and monitor the output level
from the chosen bus channel.
(54) +48V PHANTOM POWER
(55) POWER INDICATOR
(56) & (57) UP AND DOWN BUTTONS To choose the desired preset.
(58) ENTER BUTTON Activates the selected preset.