1. DL manuals
  2. KAM
  3. Microphone system
  4. KWM1935
  5. Instruction Manual

KAM KWM1935 Instruction Manual

Summary of KWM1935

  • Page 1

    M a d e i n c h i n a due to continuous product development, please ensure that you have downloaded the latest instruction manual for this product from the kam website at www.Kam.Co.Uk m a n u a l v e r s i o n 1 . 0 0 1 / 0 6 / 1 2 for the latest updates and information on the entire kam range visi...

  • Page 2

    Thank you for purchasing this kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future referenc...

  • Page 3

    Kwm1935 - front panel 1. Power switch 2. Channel selector panel (see below for channel selection instructions) 3. Power status led 4. Rf signal indicator led - lights when the receiver is receiving a signal from the transmitter. 5. Volume control kwm1935 - rear panel 6. Power inlet 7. Squelch sensit...

  • Page 4

    Microphone transmitter(s) power on / off / standby switch low battery indicator led - when continuously lit you have approximately one hour left of useful operation. Ideally change the battery when lit. Battery cover & aaa alkaline batteries - provide power to the microphone transmitter. Typical bat...

  • Page 5

    Channel/frequency table channel 1 863.00mhz channel 2 863.40mhz 1 2 3 4 1 2 3 4 channel 3 863.80mhz channel 4 864.20mhz 1 2 3 4 1 2 3 4 channel 5 864.60mhz channel 6 863.20mhz 1 2 3 4 1 2 3 4 channel 7 863.60mhz channel 8 864.00mhz 1 2 3 4 1 2 3 4 channel 9 864.40mhz channel 10 864.80mhz 1 2 3 4 1 2...

  • Page 6

    Specifications carrier frequencies: uhf 863 - 865 mhz frequency stabilization: dynamic range: >90db harmonic distortion: frequency response: 40hz~15khz +/-3db receiver power: dc15v transmitter power: 8.5mv battery voltage: 3v continuous usage: 6 hours s/n ratio: >90db.