KAM KXD3200 Instruction Manual

Page of 4

Download

Bookmark us

KXD3200/4400/6000/7200

1U rack mounting digital power amplifiers

M A N U A L V E R S I O N 1 . 0

2 2 . 0 6 . 2 0 1 0

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

Stereo, mono and bridge mode operation with peak level LEDs

3 x optional sensitivity setting available: 26dBb / 32dB / 1.4V

Balanced XLR outputs plus Speakeron outputs / Balanced XLR inputs

Advanced switch-mode power supply technology for high performance

Soft start, clip limiter, power limiter, thermal cut, DC, AC, short circuit

Power limiter: prevents severely clipped waveforms reaching the loudspeakers, whilst maintaining full peak power

Upgraded cooling fan with magnetic suspension technology and low noise

Frequency response: 5-36KHz - 1dB | Input sensitivity: 26dB / 32dB / 1.4V

S/N ratio: 100dB | THD: 0.04% | Damping (8 Ohms/1KHz): 280

Input impedance: 10 KOhms unbalanced / 20 KOhms balanced

Slew rate: 29V/uS / Crosstalk@rated output 8 Ohms 1KHz A-B: 75dB / B-A: 90dB

Power supply: 100~240V AC 50/60Hz

Compact size - 19 inch width x 1U height x 334mm depth

Weights: KXD3200/4400 - 5.6Kg / KXD6000/7200 - 6.0Kg

Page 1
Kxd3200/4400/6000/7200 1u rack mounting digital power amplifiers m a n u a l v e r s i o n 1 . 0 2 2 . 0 6 . 2 0 1 0 for the latest instruction manual updates and information on the entire kam range visit: www.Kam.Co.Uk kam products are manufactured by: lamba plc, unit 1, southfields road, dunstable...
Page 2
Thank you for purchasing this product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, plea...
Page 3
1. Power switch when pressed, the soft start circuit will run thus avoiding a power surge. After 3-4 seconds, there will be a clicking noise that indicates that the soft start process has finished. After a further 1-2 seconds there will be another clicking noise to indicate that the amplifier is now...
Page 4
Stereo operation connect the audio signal (e.G. Music) to the inputs (16). Set the operation mode switch (13) to stereo. Connect the matching speakers to the l+r speakeron outputs (11). Set both input gains (2) to zero. Make sure that there is an audio signal. Turn the amplifier on (8). Adjust the i...