Kam kxr power amps professional power amplifiers instruction manual www.Kam.Co.Uk.
Overview congratulations on your choice of new amplifier… cool isn’t it? We are certainly very proud of it. We believe in giving you products with the features and performance you want at a price you can afford and the kxr amplifier range is living proof of our commitment to meeting that goal. We kn...
You may encounter 16 ohm. A speaker that is rated at 8 ohm presents a larger amount of resistance to the amplifier than one that is rated at 4 ohm. As you can see from the chart below this means that a particular amplifier will deliver greater power to a pair of 4 ohm speakers than it would to a pai...
Bridge mode operation the following kxr amplifiers feature bridge mode operation; kxr600, kxr1000, kxr1500 & kxr2000. Bridge mode is a professional feature that is actually fairly complex.It is a means of devoting the entire power of your amplifier to a single audio input. But you cannot simply conn...
Connecting mixers etc… which equipment is right for your amplifier? All audio input connections on all kxr amplifiers operate strictly at line level. This means that, providing you have an appropriate cable, you can connect any line level audio device to the input connections on the back of your amp...
Now you are ready to play some music; 1. Put on a record, slide in a cd etc and start it playing 2. If you use a mixer, use it to set up optimum input and output signal levels – the level meter should be peaking at around zero db 3. Slowly turn up the volume controls on your kxr amplifier – if you h...
Kxr150 power amplifier amplifier power output 75w rms per channel @ 4 ohms 50w rms per channel @ 8 ohms input connections balanced xlr, unbalanced jack & rca phono output connections speakon & binding post minimum impedance 4 ohms frequency response 20hz - 30khz (±1.5db) s/n ratio 85db thd 0.05% dim...
Kxr1000 power amplifier amplifier power output 500w rms per channel @ 4 ohms 340w rms per channel @ 8 ohms input connections balanced xlr & unbalanced jack output connections speakon & binding post minimum impedance 4 ohms frequency response 20hz - 30khz (±1.5db) s/n ratio 84db thd 0.1% dimensions 3...
