KAM Star Cluster 150 Instruction Manual - page 4
Proper laser set up &usage
This fixture has been designed to be hung. It is recommended for safety purposes,your lighting effect are properly mounted using a
suitable hanging clamp andsafety cable. Items appropriate for safe and effective mounting are easilysourced from your lighting
vendor.
International laser safety regulations require that lasers must be operated in thefashion illustrated below, with a minimum of 3
metres (9.8 ft) of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 metres of horizontal
separation is required between laser light and audience or other public spaces.
Front Panel
1. Laser output – Laser output aperture
2. Power – Main power indicated LED. Red is ON
3. Music/IR – Synchronize to detected music signal / IR indicator
(flashing for each signal received)
4. IR – Infrared remote receiver
Rear Panel
5. Switch – Switch on and off the power
6. Mains input – with socket and intergrated fuse holder
7. DMX input - 3 PIN Male XLR
8. DMX output – 3 PIN Female XLR
9. Interlock – For emergency laser stop
10. Key switch
11. Safety eye – Attach the safety cable
12. Microphone – to detect music/sound
13. LED function display