KAM Tri140 FScan Instruction Manual - page 3
DMX mode
Using a DMX controller
Each laser uses 10 DMX channels
Set the DMX address of beach unit as required using DMX binary to configure the DMX channel you
require.
In the drawing below we start the first unit with the DMX address of 1
REAR PANEL
1. Mains input
Power sockets with fuses (2A)
2. Fan
3. Mic
4. Adjust mic sensitivity
5. Dip switches
6. DMX output sockets
7. Earth tag
8. Key switch
9. DMX input socket
In standalone mode there are 25 pre-programmed patterns available. When using the DMX controller
there are 42 present patterns available.
DMX channels
Ch1. Mode selector
Ch2. Pattern select
Ch3. Rotation left / rotation right
Ch4. Spin image
Ch5. Flip image
Ch6. Moving image left to right
Ch7. Moving image up and down
Ch8. Tracing image
Ch9. Shows vector path of image
Ch10. Colour selection