Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustration in this book. Issue c12 kambrook - australia building 2, port air industrial estate 1a hale street botany nsw 2019 australia customer service line 1300 139 798 customer service fax...
Instruction booklet arctic hv 46cm floor fan kfa624.
Important please retain your instruction book for future use. In the event that you need some assistance with your kambrook appliance, please contact our customer service department on 1300 139 798 (australia) or 0800 273 845 (new zealand). Alternatively, visit us on our website at www.Kambrook.Com....
Contents kambrook recommends p4 safety first your kambrook arctic hv p6 46cm floor fan using your kambrook p7 floor fan care and maintenance p9.
4 kambrook recommends safety first important: please retain your instruction book for future use. At kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appli...
5 important safeguards for all electrical appliances • fully unwind the power cord before use. • connect only to a 230v or 240v power outlet. • do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted. • to protect against electric shock, do not immerse ...
6 not shown • convenient carry handle for portability • nuts (2) and washers (2) to secure fan head to triangular base • small screw (1) with washers (2) to fit the triangular base together high med low off your kambrook arctic hv floor fan 1. Fan blade size: 46cm 2. Choice of 3 fan speed settings 3...
7 using your kambrook arctic hv floor fan before first use carefully remove the fan from its packaging and also remove any promotional material from the fan. Important: when unpacking the fan, check to see you have received all the items before discarding the packaging. Assembling your kambrook arct...
8 to operate the floor fan plug the cord into a 230v or 240v power point and switch on. The fan has 3 speeds.To adjust the flow of air, turn the fan speed dial located at the back of the fan to the preferred speed - low, med or high. To turn off, turn the fan speed dial to the off position. Note: to...
9 care and maintenance before cleaning, always turn the floor fan to the off position, switch off at the power outlet, then unplug at the power outlet. To clean the fan, remove dust that may have accumulated with a soft cloth or a vacuum cleaner using the brush attachment. Wipe the exterior of the f...
10 notes.
11 notes.
