Kambrook CORDFREE KSK110 Instruction Booklet - Stainless Steel 1.8L Kettle
4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Stainless Steel 1.8L kettle
• Carefully read all instructions before operating
the Kambrook Kettle for the first time and save
for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the kettle for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this kettle.
• This kettle has been designed specifically for
the purpose of boiling drinking quality water
only. Under no circumstances should this
product be used to boil any other liquids or
foodstuffs.
• Do not place the kettle near the edge of a
bench or table during operation. Ensure that
the surface is level, clean and free of water
and other substances.
• Do not operate the kettle on a sink drain
board.
• Always ensure the kettle is properly assembled
before use. Follow the instructions provided in
this book.
• The kettle must be used only with the power
base supplied.
• The kettle is not intended to be operated by
means of an external timer or separate remote
control system.
• Always fill the kettle with water between the
minimum (MIN) and maximum (MAX) marks on
the water window on the appliance. Too little
water will result in the kettle switching ‘OFF’.
Filling above the maximum mark (MAX) may
result in boiling water splashing from the kettle.
• The lid should always be locked firmly in place
in the closed position before and during use.
Do not open the lid during operation as this
may result in boiling water splashing from the
kettle. Pour all the hot water from the kettle
before opening the lid to refill.
• Do not remove the kettle from the power
base during operation. Ensure the kettle
has switched off after the water has boiled
before removing the kettle from the power
base. If the kettle is removed from the power
base during the boiling cycle the kettle will
automatically switch off.
• When using the kettle, avoid spillage of water
on the kettle base and connector as this may
cause damage to the kettle.
• Care should be taken when handling the
kettle during use, ensuring that the kettle
body and parts are not touched as these may
still be hot due to residual heat after boiling.
Always ensure to use the kettle handle when
removing the kettle or pouring water after
kettle has boiled.
• Do not operate the kettle on an inclined
plane. Do not operate the kettle unless the
element is fully immersed. Do not move while
the kettle is switched on.