Kambrook Jaguar 1600W Instruction Booklet - Replacing Cloth Bag Or
8
Replacing Cloth bag or
Paper dust Bag
With your vacuum cleaner you have
the option of using a cloth bag or
paper dust bag.
The dust bag should be changed
when full. The dust bag indicator
window will gradually turn red as
the bag fills up and when the dust
bag indicator displays ‘red’, it is
time to change the dust bag.
Always switch the vacuum cleaner
‘OFF’, then switch off at the power
outlet and unplug the vacuum
cleaner prior to replacing dust
bags or filters.
To remove the dust bag, ensure
the vacuum is down on its wheels,
remove the crush proof hose and
push the ‘Dust bag compartment lid
release lever’ located at the front of
the unit. Once the lid has released,
pull the top cover back.
To remove the bag, grasp the top of
the dust bag and pull out. If you are
using the cloth bag dispose the dust in
a rubbish bin. If you are using a paper
dust bag you can dispose the bag
with its contents in the rubbish bin.
To place a new dust bag, take a
fresh dust bag and with the arrow
(printed on the front section of the
dust bag) pointing down, slide the
dust bag down into the holder, until it
comes in contact with the bottom of
the holder, then push the holding clip
forward to secure.
NOTE: Once the bag is inserted
‘puff-out’ the bag as much
as possible to ensure the full
capacity of the bag can be
taken up.
When vacuuming fine dust particles,
the fine dust particles can clog the
pores of the dust bag and the dust
bag indicator will indicate full. If this
happens the bag could appear
relatively empty, however the bag
will still need to be changed to avoid
strain on the motor.
NOTE: The bag compartment lid
may not close if the bag is not
correctly fitted.