Kambrook KBL200 Manual - Kambrook Safety
KAMBROOK SAFETY
Welcome to Kambrook and your new Kambrook
blender. At Kambrook we believe that the safe
performance is the first priority in any consumer
product so that you, our valued customer, can
confidently use and trust our appliances. We ask
that any electrical appliance you use be operated
in a sensible fashion with due care and attention
placed on the following important operating
instructions.
IMPORTANT SAFEGUARDS FOR YOUR
KAMBROOK BLENDER
Carefully read all instructions before
operating the blender and save for future
reference.
Remove and safely discard any packaging
material and promotional labels before using
the blender for the first time.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
the blender.
Do not place the blender near the edge of a
bench or table during operation. Ensure that
the surface is level, clean and free of water,
flour and other substances. Vibration during
operation may cause the appliance to move.
Do not use the blender on a a sink drain
board.
Do not place the blender on or near a hot gas
or electric burner, or where it could touch a
heated oven.
Always ensure the blender is properly
assembled before use. Refer to the assembling
and operating instructions in this book.
Use only the blender jug and lid supplied with
the blender.
Always ensure the blender lid is firmly
positioned on the blender jug before
operating.
Do not leave the blender unattended when in
use.
Always ensure the blender is turned off by
selecting “0” on the speed control dial. Then
switch the appliance off at the power outlet
and unplug the power cord. Ensure the motor
and blades have completely stopped before
attempting to move the appliance, or
when the blender is not in use and before
disassembling, cleaning and storing.
•
•
•
•
•
•
•
•
•
•
•
Do not operate the appliance continuously
with heavy loads for more than 1 minute.
Allow the motor to rest for 1 minute between
each use. None of the recipes in this
instruction book are considered a heavy load.
If food becomes lodged around the blending
blades, turn the blender off by selecting “0”
on the speed control dial. Then switch the
appliance off at the power outlet and unplug
the cord. Ensure the motor and blades have
completely stopped before removing the jug
from the motor base, use a spatula to dislodge
or stir the food before continuing. Do not use
fingers as the blades are sharp.
Keep hands, fingers, hair, clothing, as well
as spatulas and other utensils away from the
blender jug during operation. Never place
your fingers, hands or utensils inside the
blender jug without unplugging the appliance
from the power outlet.
Ensure care is taken when handling the sharp
blades, emptying the blender jug and when
cleaning the blender jug.
Do not disassemble the blender blade
assembly as the blades are very sharp.
Mishandling of the blades may cause injury.
Do not attempt to disassemble the blender
jug from the blade assembly. The blade
assembly is not removable from the jug. To
clean the blender, refer to the Disassembling
and Cleaning section of this book.
Do not remove the blender jug from the
motor base whilst in operation.
Do not operate the blender without food or
liquid in the blender jug.
Do not process hot or boiling liquids. Allow
to cool before placing into the blender jug.
Do not subject the blender jug to extremes of
hot or cold, for example, placing a cold jug in
hot water or vice versa.
Keep appliance clean. Follow the cleaning
instructions provided in this book.
IMPORTANT SAFEGUARDS FOR ALL
ELECTRICAL APPLIANCES
Unwind the power cord fully before use.
To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•