Kambrook - australia building 2, port air industrial estate 1a hale street botany nsw 2019 australia customer service line 1300 139 798 customer service fax 1800 621 337 www.Kambrook.Com.Au due to continual improvement in design or otherwise, the product you purchase may differ slightly from the ill...
Ceramic tower heater kce240 instruction booklet.
Important please retain your instruction book for future use. In the event that you need some assistance with your kambrook appliance, please contact our customer service department on 1300 139 798 (australia) or 0800 273 845 (new zealand). Alternatively, visit us on our website at www.Kambrook.Com....
Contents kambrook recommends p4 safety first your kambrook ceramic p7 tower heater quick start guide p8 using your kambrook heater p9 care and maintenance p12.
4 kambrook recommends safety first important: please retain your instruction book for future use. At kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appli...
5 important safeguards for all electrical appliances • fully unwind the power cord before use. • connect only to a 230v or 240v power outlet. • do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted. • to protect against electric shock, do not immerse ...
6 important safeguards for all electrical appliances continued • always turn the appliance to the ‘off’ position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. • before cleaning, always turn the appliance to the ‘off’ position, switch off at the powe...
7 your kambrook ceramic tower heater 1. Led screen 2. Control panel; featuring: • power on/off button • mode button (2 heat settings, auto and fan only setting) • temperature button (+/-) to set variable temperature • timer button (up to 8 hours) • swing button to set oscillation 3. Remote control w...
8 quick start guide turning the heater on power mode temperature timer swing plug the cord into a 230v or 240v power point and switch on. Switch the heater on using the ‘on/off’ switch on the back of the heater. Press the ‘power’ button to activate heating. The heater will be in low heat mode (1100w...
9 using your kambrook heater before first use remove your heater from its carton and associated protective wrapping. Unwind the cord to its full length and remove any protective cardboard or foam that may have been used to minimise transportation damage. Place the heater on a firm, level surface in ...
10 setting the oscillation this function will work in any mode. Pressing the ‘swing’ button will allow the heater to oscillate back and forth. To stop the unit oscillating, press the ‘swing’ button once more. Setting the auto-off timer the timer function works in all operating modes, and switches th...
11 thermoguard overheating safety device your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait until the unit is fully cooled for the protectio...
12 care and maintenance • ensure that the heater is switched off and disconnected from the power outlet before cleaning. • use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a ...
13 notes.
14 notes.
15 notes.
