Summary of KCE520
Page 1
Ceramic heater kce520 instruction booklet kce520_ib_fa.Indd 1 12/10/09 12:10 pm.
Page 2
Important please retain your instruction book for future use. In the event that you need some assistance with your kambrook appliance, please contact our customer service department on 1300 139 798 (australia) or 09 271 3980 (new zealand). Alternatively, visit us on our website at www.Kambrook.Com.A...
Page 3
Contents kambrook recommends p4 safety first your ceramic heater p6 quick start guide p7 using your ceramic heater p8 care and cleaning p11 warranty details p12 kce520_ib_fa.Indd 3 12/10/09 12:10 pm.
Page 4: Ceramic Heater
4 kambrook recommends safety first important: please retain your instruction book for future use. At kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appli...
Page 5: Appliances
5 • do not allow materials that have been in contact with oil, petroleum based products or drying fluids to come in contact with the heater. • do not run the cord under carpeting or cover the cord with rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped o...
Page 6: Your Ceramic Heater
6 your ceramic heater 1. 1800 watt ceramic heating element for efficient heating 2. Lcd screen 3. Thermoguard protection for peace of mind control panel 4. Convenient 8hr auto-off timer 5. 2 heat setting, plus auto mode and fan only setting 6. Power/swing button to turn the heater on and off, and ac...
Page 7: Quick Start Guide
7 the heater will start operating at the low heat setting. Quick start guide hints/tips to retain heat in your home • don’t overheat your home. The temperature of a heated room in winter should be 18-21°c • your heater will work more efficiently if you stick to kambrook’s recommended clearance space...
Page 8: Using Your Ceramic Heater
8 using your ceramic heater to activate the heater, press the power/swing button. The heater will start operating on the low heat setting (1100 watts) and the lcd screen will illuminate, displaying the ambient room temperature and heat setting. Note: after several seconds, the lcd screen will fade, ...
Page 9: Setting The Variable
9 setting the variable temperature the variable temperature can be used to maintain your desired temperature. Note: the variable temperature only operates when the heater is being used in the auto mode. Press the mode button until the heater is set to auto mode. The lcd screen will display the defau...
Page 10: Thermoguard Overheating
10 thermoguard overheating safety device your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait for the heater to cool for the protection system...
Page 11: Care and Cleaning
11 care and cleaning ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualifie...
Page 12
In australia, this kambrook replacement warranty does not affect the mandatory statutory rights implied under the trade practices act 1974 and other similar state and territory legislation relating to the appliance. It applies in addition to the conditions and warranties implied by that legislation....