Kambrook - australia building 2, port air industrial estate 1a hale street botany nsw 2019 australia customer service line 1300 139 798 customer service fax 1800 621 337 www.Kambrook.Com.Au due to continual improvement in design or otherwise, the product you purchase may differ slightly from the ill...
Ceramic oscillating heater kce95 instruction booklet.
Important please retain your instruction book for future use. In the event that you need some assistance with your kambrook appliance, please contact our customer service department on 1300 139 798 (australia) or 0800 273 845 (new zealand). Alternatively, visit us on our website at www.Kambrook.Com....
Contents kambrook recommends p4 safety first your ceramic oscillating heater p6 quick start guide p7 using your ceramic p8 oscillating heater care and cleaning p10
4 kambrook recommends safety first important: please retain your instruction book for future use. At kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appli...
5 • this heater has hot and arcing or sparking parts inside. Do not use in areas where petrol, paints, aerosols, or other inflammable substances are used or stored. • do not allow materials that have been in contact with oil, petroleum based products or drying fluids to come in contact with the heat...
6 your ceramic oscillating heater 1. Carry handle (at back) 2. Power on/off switch (at back) 3. 2 heat settings and fan only setting 4. Thermostat control 5. Oscillating function 6. Led screen 7. 1800 watts ceramic heating elements not shown • safety tip-over cut-out switch • thermoguard protection.
7 pressing the mode button again will set the heater to high heat mode (1800w). Quick start guide turning the heater on setting the variable temperature setting the heating mode setting the oscillation turning the heater off when first set to auto mode, the led will display the default temperature o...
8 using your ceramic oscillating heater • remove your heater from its carton and associated protective wrapping. • unwind the cord to its full length and remove any protective cardboard or foam that may have been used to minimise transportation damage. Place the heater on a firm, level surface in a ...
9 setting the oscillation this function will work in any mode. Pressing the swing button will allow the heater to oscillate back and forth. To stop the unit oscillating, press the swing button once more. Setting the variable thermostat temperature 1. Press the mode button until the heater is set to ...
10 always turn off and then unplug the heater before cleaning. Use only a clean, dry cloth to clean the external surfaces of the heater only. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater...
11 notes.
