Kambrook KEB201 Instruction Booklet - Using Your Snugasabug
7
Using Your Snugasabug
®
Tie-Down
Electric Blanket
Before First Use
Remove any promotional material
and packaging from the electric
blanket.
Securing Your Tie-Down
Electric Blanket
Place the electric blanket on the
mattress towards the foot of the bed.
Leave sufficient room for the pillow
and ensure the control leads are near
the head of the bed. Remove tags
from tie tapes. Pass the middle tie
tape under the middle of the mattress
and through the middle loop on the
opposite side. Tie tightly.
Pass end tape under the bottom
corner of the mattress and through
the end loop, then down under
the opposite bottom corner of the
mattress and through the bottom side
loop. Tie tape firmly.
Repeat procedure for the tape at the
top end of the mattress. The electric
blanket should now be firmly taped to
the mattress as shown in Fig 3.
Turning Your Tie-Down
Electric Blanket On
Ensure the electric blanket controller
is positioned in the ‘OFF’ position
indicated by a ‘0’.
Plug the cord into a 230V or 240V
power outlet and switch the power on.
Fig. 1
Fig. 3
Fig. 2
KEB201_IB_FA.indd 7
12/10/09 10:08 AM