Ket99 issue 2/00 ggoo oodd nnaammee g goo o oddvv a alluu e e electronic timer mo tu we th fr sa su count down auto manual rnd ± 1h day clock prog. Count down hours min. Reset.
Before using your timer, please read the following instructions carefully.This quality product has been tested and certified to meet applicable australian and new zealand electrical and safety standards. Specifications input: ac 220-240v 50hz output 10a resistive load. Operating temperature: -10° c ...
Features up to 8 on and off switches a day / 56 on and off switches a week. Option to program individual days or 8 different weekday groups. Minimum switching period is one minute. Summer time / winter time change over. Easy to read lcd display. Random automatic on / off security feature. Manual ove...
Do not open the timer.There are no user serviceable parts inside. Authorised service personnel must perform repairs only. Use a soft cloth to clean casing and display. Do not use chemical or scouring agents. Do not submerge in water. Keep device out of reach of children. Do not use near flammable ga...
Setting the time press and hold the clock button. With this held pressed, the day button can be used to select the correct day, or the hours button used to select the correct hour and the min button to select the correct minutes.When the min button is released the time will be set with the seconds s...
For each on time and each off time, the day, hours and minutes must be set. Press the prog button once to set the first on time – you will see on and number “1” appear on the left of the lcd display. This indicates that you can now enter the first on time. Press the day button to choose the required...
Manual override you can choose permanent on, permanent off and auto mode by pressing the manual ( ) button. Check the display for arrow indicator for auto or manual, then the on / off on the left-hand side of the screen.The timer programs will only work in the auto on or auto off settings. Mode func...
Activating, the timer will still switch on and off within the set programmes. For example, the random mode might switch the timer to off even when the timer is switched on by the set programmes. Please note that if the timer has no set programme, the timer will switch on and off about 1 minute after...
The maximum countdown time selection is 9 hrs and 59 mins and the minimum countdown time selection is 1 min. After you have selected the countdown time, you can press the manual ( ) button to start.The output will turn on until the end of the countdown period.You can pause the countdown any time dur...
Kambrook 12 month guarantee kambrook warrants the purchaser against defects in workmanship and material, for a period of 12 months from the date of purchase (3 months commercial use). Guarantee and purchase receipt for this product are to be retained as proof of purchase and must be presented if mak...
