Kampmann 30277 Operating Instructions Manual - 1.96
12
.
1.96
2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Operating instructions
4.1 Timing Switch Operation
Safety Information
Any defect on the timer must be repaired and tested by a qualified
engineer or can also be repaired under the supervision and guidance of a
qualified engineer.
Installation instructions:
The unit is suitable for use in ambient conditions with normal levels of
pollution in the air.
Operating instructions:
During the development of our products, we place very high demands
on the electromagnetic compatibility (EMC) of the electronic components.
The interference immunity achieved clearly exceeds the currently-valid
requirements of the corresponding EN standards. Check in each
individual case whether additional protection measures are needed, e.g.,
the integration of respective components (Varistor, suppressor diode,
RC element).
In extreme cases, it is recommended that an additional assembly group be
included, e.g., an isolating relay or switching contact, interference
suppression filter.
User instructions:
Do not use metallic pointed or sharp objects (e.g. needles) to press buttons
which are tool-operated.
4.2 Connection
see Fig. 6
4.3 Display / operating elements (Figure 7)
Fig. 6: Connection
Fig. 7: User interface
Overview of daily switching program
Setting of 24h or am/pm
Summer/winter clock changes
Weekday display
Switching status display ON/OFF
Manual operation / fixed ON / fixed OFF
Automatic operation
Adjustment keys: By pressing the key longer than 2 sec. you
can adjust the timer in steps of 5 units.
Reset
By pressing the menu key programming is terminated and the system reverts to
automatic operation
Confirmation of programming
1 = +3.4 V (red)
2= 0 V
3 = Channel 1 output
4 =Channel 2 output
(Channel 2 is not
used)
.
1.96
2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Operating instructions