Instruction manual for kamweld fusion series welders (models fw-5a, fw-5b, fw-5c & fw-5d).
Warranty kamweld technologies, inc. (the “manufacturer” or “kamweld”) warrants its products and repair services to be free from defects in materials and workmanship under limitations of normal operation by the purchaser, as prescribed in the instructions furnished to the purchaser, for a period of 9...
Specifications welder model number fw-5a fw-5b fw-5c fw-5d category fusion welder fusion welder fusion welder fusion welder description plastic welder with digital display process controller; runs on shop air or inert gas plastic welder with dial process controller; runs on shop air or inert gas pla...
Operation 1) inspect the equipment and verify that all components are complete and that there is no damage to the unit. 2) select the appropriate welding tip and screw it into the threaded end of the heat gun barrel, using caution not to damage the thermocouple located at the end of the heat gun hea...
9) for model’s fw-5b and fw-5d, turn the heat gun temperature control knob clockwise to increase the air temperature. Each division on the rotary dial increases the air temperature by approximately 90 degrees fahrenheit (note: the air temperature increase from “low” to position “1” is greater than t...
14) after the cool down interval, turn off the control box at the "main power" switch. 15) if at a work bench station, unplug the fusion welder from the ac outlet. 16) if in a field environment, unplug and pack the fusion welder in its storage toolbox (purchased separately) or storage position (afte...
