Kanaan KN40546 User Manual - page 3
3
TECHNICAL DETAILS
Maximum cable length input/output
≤ 15m/25m ( HDMI AWG26 )
HDMI resolution
4k*2k / 1080p /1080i /720p / 576p / 576i /
480p / 480i @24/25/60 Hz
HDMI version
HDMI version 1.4
Colour depth
24/30/36/48 bit
Band width
up to 340MHz
Supported audio formats
DTS-HD/Dolby-TrueHD/LPCM
7.1/DTS/Dolby-AC3/DSD-HD (HBR)
Input video signal (TDMS)
0.5~1.5V p-p
Input DDC signal
5V p-p (TTL)
EDID duration
4 seconds
CONNECTION AND OPERATION
Step 1: Connect the output of the HDMI device to the splitter.
Step 2: Connect the cables of every displaying device to the HDMI outputs of the splitter. For
a perfect transmission via cables which are longer than 10m, please use high quality cables
only.
Step 3: Connect the 5V power supply to the HDMI splitter
Step 4: As soon as the input signal is received, the "input" LED will glow. If something doesn't
work right, please check the cables and the output adjustments of the source device. The
same goes for the output. A functioning HDMI connection will be signalised through the LEDs
"L1" or "L2".
Note: For the protection of the splitter and other devices, please make sure, that the splitter is
switched off before connecting the other devices. Please don't pull or push at the HDMI
connections.