Summary of K64P36W3RGBAW
Page 1
User manual k64p36w3rgbaw.
Page 2
I n d e x summarize ......................................................................... 3 safety instruction ................................................................ 3 outside size picture ............................................................. 4 main function ......................
Page 3
Summarize thank you for purchasing our led par lighting. Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage. Products introduce this led k64p36w3rgbaw light is uses aluminum she...
Page 4
●before the installation, please check the light’s fasteners and mechanical structure have been received in good condition and appear no damage. ●this light is designed for indoor use, working temperature is lower than 40 degree. ●the fixtures maybe mounted in any position provided there is adequate...
Page 5
Main function • high quality led: low consumption, brightness, stable capability and long life • each color of led with 256 dimming, rgb each color has a good degree of saturation. • liner dimming 0%-100%, function of strobe, eotic, gradual change and jumping change • dmx512 controller，4 button set ...
Page 6
9ch channel dmx value control function remark 1ch 0-255 general dimming 2ch 0-255 red dimming 0——100% 3ch 0-255 green diming0——100% 4ch 0-255 blue dimming 0——100% 5ch 0-255 amber 0——100% 6ch 0-255 white 0——100% 0-14 dimming 7ch 15-255 strobe speed when the 7ch above31 ，this function is invalid 0-31 ...
Page 7
Manual instruction operating instruction 1 menu is used to access the menu or return to a previous menu option. It can not be used to select and store the current menu option. Press up / down to choose a desired menu item. Here are the operation details : • ”addr”: dmx mode （a001-a512） • slav”: slav...
Page 8
• press enter to select and store the current menu options. Dmx mode will be • stored automatically and the screen will stop glinting. • dmx channel choosing operation：chnd mode • press menu, go back to the initial setting • press up/down，until shows “chnd” • press enter to access the menu items to ...
Page 9
Operating control instruction master/slave master ：the master should set as built-in program and shows” p - x – x” send out synchronization signals. To avoid the host signal and dmx512 signals interfere with each other, should cut off the dmx512 signals. The signal lines are longer than 60 meters sh...
Page 10
The conversion between 3pin and 5 pin xlr if the output cable of dmx512 controller is the 5pin, please use 1pc 5pin to 3pin cable.
Page 11
Connecting picture cable connecting picture ：.
Page 12
Electrical wiring diagram.
Page 13
Exploded views.
Page 14
Luminance list.
Page 15
Problem analyze problem checking way can not turn on the light check the power source plug is in normal or not check the switch of the lights is off or on check it the fuse if in normal dmx can not control it check the dmx cable is connect to the lights or not check the dmx512 controller work in nor...
Page 16
Some of the led not light use the multimeter to check if the led is bright or not, of not, please change the led check whether current limiting resistor is normal or not check constant current ic is normal or not (compared with the normal ic) single color leds always bright/not bright check the swit...
Page 17
Technical specification • input voltage：ac 100v-264v/47-63hz • output voltage：dc24v • consume：60w （36*3w：120w） • lamp type：high power led(1w/3w) • lamp spec：r(6pcs)， g(8pcs)， b(8pcs)，a(6pcs)，w（8pcs） • control signal：dmx512, sound activated, auto run • control mode：stand alone/ sound activated • chan...
Page 18
Copyright 2012 kandolite. All rights reserved. Due to continuous improvements and innovations, specifications may change without notice..