Summary of K64P818RGBW
Page 1
User manual k64p818rgbw.
Page 2
I n d e x summarize ......................................................................... 3 safety instruction ................................................................ 3 outside size picture ............................................................. 4 main function ......................
Page 3
Summarize thank you for purchasing our led par lighting. Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage. Products introduce led k649818rgbw light uses aluminum shell, design...
Page 4
● make sure the power supply voltages are consistent with this lights ，ensure the use of voltage is in the range of the request technical parameter. ●before the installation, please check the light’s fasteners and mechanical structure have been received in good condition and appear no damage. ●this ...
Page 5
Main function • each color of led with 256 dimming. Rgb can make over 16.7 million colors • dim 0%-100%, strobe、gradual change、jumping change • dmx512 controller，4 button set dmx id address with led display • auto run /sound activated/master slave/interconnected multi-machine control • using switchi...
Page 6
4ch channel dmx value control function remark 1ch 0-255 r 0-100% 2ch 0-255 g 0-100% 3ch 0-255 b 0-100% 4ch 0-255 w 0-100% 5ch channel dmx value control function remark 1ch 0-255 general dimming 2ch 0-255 r 0-100% 3ch 0-255 g 0-100% 4ch 0-255 b 0-100% 5ch 0-255 w 0-100% 8ch channel dmx value control ...
Page 7
Display operation • menu : access the menu or return to a previous menu option • enter: select the current menu option • up: menu selection or parameter increments • down: menu selection or parameters decrease.
Page 8
Manual instruction addr a001-a512 dmx mode slav sl.Av slave receiving mode chnd 3.4.5.8 dmx receiving channel choosing sp-- sp-sp15 built-in program speed pr-- pr00-pr15 built-in program asc as00-as1 5 color jumping menu fade fa00-fa15 gradual changing mode flas fl00-fl15 white strobe mode rl r000-r...
Page 9
Operating instruction 1 、 menu is used to access the menu or return to a previous menu option. It can not be used to select and store the current menu option. Press up / down to choose a desired menu item. Here are the operation details : • “addr”：dmx mode； （a001-a512） • “slav”： slave receiving mode...
Page 10
• press enter to select and store the current menu options. Dmx mode will be o stored automatically and the screen will stop glinting. • dmx channel choosing：chnd mode • press menu，go back to the initial setting • press up/down till “chnd” • press enter to choose, the display will glinting at this m...
Page 11
Operating control instruction master/slave master ：the master should set as built-in program and shows” p - x – x” send out synchronization signals. To avoid the host signal and dmx512 signals interfere with each other, should cut off the dmx512 signals. The signal lines are longer than 60 meters sh...
Page 12
The conversion between 3pin and 5 pin xlr if the output cable of dmx512 controller is the 5pin, please use 1pc 5pin to 3pin cable.
Page 13
Connecting picture cable connecting picture ：.
Page 14
Problem analyze problem checking way can not turn on the light check the power source plug is in normal or not check the switch of the lights is off or on check it the fuse if in normal dmx can not control it check the dmx cable is connect to the lights or not check the dmx512 controller work in nor...
Page 15
Some of the led not light use the multimeter to check if the led is bright or not, of not, please change the led check whether current limiting resistor is normal or not check constant current ic is normal or not (compared with the normal ic) single color leds always bright/not bright check the swit...
Page 16
Technical specification • input voltage: ac 100-264v / 47-63hz • output voltage: dc24v • consume: 144w • lamp type: high power led (8w) • lamp spec: 4-in-1 8w（18pcs） • constant current driver: 500ma • refresh rate : >400hz • life span: 50000~100000hours • control signal：dmx512, sound activated, auto...
Page 17
Copyright 2012 kandolite. All rights reserved. Due to continuous improvements and innovations, specifications may change without notice..