Summary of KMLSP60W
Page 1
User manual kmlsp60w.
Page 2
I n d e x summarize ......................................................................... 3 statement .......................................................................... 3 safety instruction ............................................................... 4 installation instruction ..........
Page 3
Summarize thank you for purchasing our led moving lighting. Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage. Statement thank you choosing our professional kmlsp60w led moving...
Page 4
Safety instruction • please consult eligible personas before maintenance • please make sure the power supply has been cut off during installation, maintenance, and transportation. • please do not use power supply and lamps of different specifications • during operation, the high temperature the ligh...
Page 5
Installation instruction dimension diagram • the product is suitable for indoor use only, operation temperature is below 35 degree • the installation, operation and maintenance persons must get familiar with the light performance before operation, so that to avoid damage during transportation before...
Page 6
Display operation menu : access the menu or return to a previous menu option enter : select the current menu option up : menu selection or parameter increments down : menu selection or parameters decrease • address code • reset • auto • fast • slow • sound • slave • pan reversal • tilt reversal • ch...
Page 7
Dmx control function mode 9 mode 10 mode 15 dmx value control function ch 1 ch 1 ch 1 0 - 255 x : pan ch 2 ch 2 ch 2 0 - 255 y : tilt ch 3 0 - 255 x : pan, fine ch 4 0 - 255 y: tilt, fine ch 3 ch 3 ch 5 0 - 255 x, y : pan / tilt speed, fast to slow ch 4 ch 4 ch 6 0 - 255 intensity zero to full shutt...
Page 8
105 - 111 gobo 2 (shake slow to fast) 112 - 118 gobo 1 (shake slow to fast) 119 - 125 open (white) 126 - 192 gobo river (clockwise of rotation , slow to fast) 193 - 255 gobo river (anticlockwise of rotation , slow to fast) gobo effect wheel 0 - 18 open (white) 19 - 37 gobo 1 38 - 56 gobo 2 57 - 75 g...
Page 9
Xlr cable connecting xrl cable ： ： ： ： the stand connection way of the xrl is: one end connects to the male plug, and the other connects to the female. Noted ： in order to avoid failures and interference signal transmission ， we connect a resistance120Ω （ 1/4w ） at the end of the dmx connecting as b...
Page 10
The conversion between 3pin and 5 pin xlr if the output cable of dmx512 controller is the 5pin, please use 1pc 5pin to 3pin cable general troubleshooting failure description measure fail to start power fuse intact bulb the normal lamp is not controlled by the controller inspect dmx start address set...
Page 11
Maintenance • when the light has broken and other damage should be promptly replace. • when the light bulb has deformation, the damage should be immediately replaced. • when the lamp not boot, check whether the lamp power supply fuse blown, such as blown, fuse fitted on the corresponding specificati...
Page 12
• do not use alcohol and other organic solvents to clean lamp shell, so as • to avoid causing damage. Technical specification • power supply : ac 120v / 230v / 60/50hz • control : dmx 512 • channels : ch09, ch10 & ch15 • power consumption : 140w • light source : 60w white color led • net weight : 13...
Page 13
Copyright 2012 kandolite. All rights reserved. Due to continuous improvements and innovations, specifications may change without notice..