KanexPro CON-AUDXTRACT User Manual - page 13
CON-AUDXTRACT
12 |
P a g e
6. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
Output images in
display show with ghost
Incorrect setting on the
display
Check the display
’s setting
A cable of bad quality
Try another high quality
connection cable
No output image when
switching
No signal at the input / output
end
Check with oscilloscope or
multimeter if there is any
signal at the input / output
end.
Fail or loose connection
Make sure the connection
is good
The extender is broken
Send it to authorized
dealer for repairing.
Static becomes
stronger when
connecting the video
connectors
Bad grounding
Check the grounding and
make sure it is connected
well.
If your problem still remaining after following the above troubleshooting steps, please
contact your local dealer or distributor for further assistance.