KanexPro EXT-100SL18G User manual - page 4
HDBaseT Extender Set
3 |
P a g e
Package List
1 x Transmitter
1 x Receiver
4 x Mounting ears & 4 x Screws
8 x Plastic Cushions
2 x RS232 Cables (3-pin to DB9)
1 x Power adaptor (24VDC,1.25A)
1 x IR Receiver (5V, optional)
1 x IR Emitter (5V, optional)
1 x User Manual
Panel Description
Transmitter
Receiver
No.
Name
Description
①
RS232 MODE switcher
CTRL: RS232 pass-through control mode;
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade method
is the same as the above UPDATE A.
②
Link status LED
OFF: No Link; GREEN:Link successful.
③
HDCP compliant LED
OFF: No HDMI traffic (no picture); GREEN: Traffic with HDCP;
Blinking: Traffic without HDCP.
④
Power LED
OFF: No power; RED: DC power present.
⑤
RS232 connectors
If one relates to control device (e.g. PC), and the other should
relate to the third-party that need to be controlled.
⑥
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
local.
⑦
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device from remote.
⑧
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT (Receiver)
Connect with HDMI display.
⑨
HDBT OUT (Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a/7 cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a/7
cable.
⑩
ETHERNET
Total 4 100M Ethernet ports, one of these ports should be used for
1
2
3
4
5
6
7
8
9
11
10
1
2
3
4
5
6
7
8
9
10
11