KanexPro EXT-HDBASE70E User Manual - 1. Introduction
4K Compliant HDBaseT™ Extender
1
1. Introduction
1.1 Introduction to HDBaseT Extender Set
The KanexPro HDBASE70E is a 4K compliant Transmitter-Receiver set made to extend
Ultra HD 4K, digital audio, wide-band IR and power over Ethernet (PoE) over a cost
effective cat6 cable. Supports computer resolutions up to 1920x1200, HD1080P/60 with
Deep Color. This HDCP compliant extender routes distances up to 230 feet using
HDBaseT™ Lite technology. Ideal for digital signage applications or routing
uncompressed HDMI A/V signals over inexpensive CAT6 in boardrooms, conference
rooms and classrooms for far-end projectors. The power from Tx is supplied to Rx
requiring no power on the receiver, since PoE is supported; therefore only one power
supply is needed.
Note:
We recommend using a metal STP connector for RJ-45. The shielded layer of
cable must be connected to the connector’s metal shell for zero EMI noise and excellent
transmission
1.2 Features
l
Supports full HD: Delivers high-resolution image (1080p 3D, 4Kx2K)
l
Maximum transmission distance is 230 ft. (70 m) for 1080p and 131 ft. (40m) for
4Kx2K over single CAT5e/CAT6 cable
l
High Bandwidth: 10.2Gps.
l
HDTV Compatible, use HDMI 1.4 and HDCP compliant.
l
Supports PoE & CEC.
l
Uses HDBaseT technology for extended capability and reliability
l
Bi-directional IR control
l
LED indicators show work status.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded
)
for good transmission effect.