KanexPro HDBase100M Setup Manual - Transmitter
3
4
Unit Layout & Description
1)
DC/5V
a Power connector
2)
Power Indicator
a. LED will light up when un it is powered
3)
Link
a. LED will light up when the HDBaseT™ link between the transmitter and
receiver unit is connected
4)
HDCP
a. LED is solid – video content with HDCP is being transferred
b. LED is blinking – indicates video content without HDCP
c. LED is OFF – no video is connected
5)
HDBaseT™
a Connect a Cat 5e/6 cable into this port on both the transmitter and
receiver unit
6)
IE (Infrared Emitter) for using an IR Remote
a. Connect the Extender Infrared Emitter cable
7)
HDMI In
a Connect HDMI from source to the HDMI port
Transmitter
Front
Back
1
2 3 4
5
6
7
1)
DC/5V
a Power connector
2)
Power Indicator
a. LED will turn on when unit is powered
3)
Link
a. LED will light up when the HDBaseT™ link between the transmitter and
receiver unit is connected
4)
HDCP
a. LED is solid – video content with HDCP is being transferred
b. LED is blinking – indicates video content without HDCP
c. LED is OFF – no video is connected
5)
HDBaseT™
a Connect a Cat 5e/6 cable into this port on both the transmitter and
receiver unit
6)
IE (Infrared Emitter) for using an IR Remote
a. Connect Extender Infrared Emitter cable
7)
HDMI In
a Connect HDMI from source to the HDMI port
Receiver
Front
Back
1 2 3 4
5
6
7