1. DL manuals
  2. KanexPro
  3. Switch
  4. HDMMX88-4K
  5. User Manual

KanexPro HDMMX88-4K User Manual

Manual is about: Modular Matrix Switcher (with Audio)

Summary of HDMMX88-4K

  • Page 1

    Hdmmx88-4k modular matrix switcher user manual all rights reserved version: hdmmx88-4k_2015v2.5.

  • Page 2: Preface

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) preface read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product. This manual is only for operation instruction only, ...

  • Page 3: Safety Precautions

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) safety precautions to ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.  unpack the equipment carefully and save the original box and packing mater...

  • Page 4: Contents

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) contents 1. Introduction ................................................................................................................. 3 1.1. About modular matrix switcher 8x8 (with audio) ..............................................

  • Page 5

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 4.3.1. Connection of rs232 communication port .......................................... 21 4.3.2. Rs232 communication commands ..................................................... 22 4.4. Tcp/ip control (optional) .......................

  • Page 6: 1. Introduction

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 1. Introduction 1.1. About the hdmmx88-4k (with audio) the kanexpro hdmmx88a-4k is an eight input by eight output modular matrix switcher chassis with two input slots and two output slots; each modular input or output card supports up t...

  • Page 7

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) ▪ 2u rack-mountable aluminum enclosure ▪ dual-internal power supply (100volt~240volt ac, 50/60hz) 1.2.1. Modular matrix switcher signal card (changeable cards) modular matrix switcher 8x8 (with audio) supports multiple signal cards as l...

  • Page 8

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio)  1 x rs232 cable  1 x user manual notes: confirm all the accessories are included, if not, please contact with the dealers..

  • Page 9: 2. Panel Description

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 2. Panel description 2.1. Modular matrix switcher 8x8 (with audio) 2.1.1. Front panel figure 2- 1 front panel of modular matrix switcher 8x8 (with audio) no. Name description ① ir ir sensor, receive ir signal sent from ir remote ② power...

  • Page 10

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 2.1.2. Rear panel figure 2- 2 rear panel of modular matrix switcher 8x8 (with audio) no. Name description ① inputs audio input slot ② outputs audio output slot ③ inputs input signal card slots, 2 in total, insert necessary input cards h...

  • Page 11

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 4o-dv: output card, maximum four output signal, output signals from 4i-dv, or other kinds of input cards. Pin layout of the dvi-i connector (dual-link). (female) pin function pin function 1 t.M.D.S.Data2- 13 t.M.D.S.Data3+ 2 t.M.D.S.Dat...

  • Page 12

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 2.2.2. 4i-ds& 4o-ds seamless dvi signal card. (please check the specification from 5.2.2) it is fully compatible with hdmi1.3& hdcp, and supports seamless transmission for high-definition dvi, hdmi, vga, av, ypbpr signals. Signal format...

  • Page 13

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) dvi-ypbpr: pin signal pin signal c1 red c2 green c3 blue c5 gnd other pins are unused. Dvi-vga (female): pin signal pin signal c1 red c2 gnd c3 green c4 horizontal sync analog 8 vertical sync analog other pins are unused. 2.2.3. 4i-hd &...

  • Page 14

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 7 tmds data 0+ 14 no connect 8 tmds data 0 shield 13 cec 9 tmds data 0- 12 tmds clock- 10 tmds clock+ 11 tmds clock shield 2.2.4. 4i-hs & 4o-hs seamless hdmi signal card with auxiliary audio port (please check the specification from 5.2...

  • Page 15

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) c-video& cvbs. Input signal can pass to output device through any kinds of output cards. 4o-vg: output card, maximum four vga output signal and 4 stereo audio outputs, output video signal from 4i-vg, or other kinds of input cards, and o...

  • Page 16

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) vga- c-video: pin signal pin signal 1 red 6 gnd 7 gnd 8 gnd other pins are not used. 2.2.6. Mod-in-vga vga signal card. (please check the specification from 5.2.6) scale all inputs to 1080p or 1920x1200; input signal can be vga (rgbhv),...

  • Page 17

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) the bnc connector is shown as the figure below. Sleeve ( ) tip (+) bnc connector 2.2.8. 4i-ss seamless sdi signal card (please check the specification from 5.2.8) it is compatible with different sdi signal formats, including sd/hd/3g-sd...

  • Page 18

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) how the indicators work: color definition status yellow power indicator blink once powered on; turn off when there is no power. Green link indicator light when the port is connected with cat5e/6; turn off when there is no connection. Pi...

  • Page 19

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) note: when matching with output cards that do not support 4kx2k, adjust the input resolution to 1080p to enable reliable output. 4o-uh: output card, maximum four output signal, output signals from 4i-uh, or other kinds of input cards, h...

  • Page 20

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 2. Multi-mode transmission may include the following cases: single-mode optical fiber module& multi-mode optical fiber cable multi-mode optical fiber module& multi-mode optical fiber cable 3. Before using 4i-uf & 4o-uf, upgrade the fron...

  • Page 21

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) balanced audio connection: unbalanced audio connection:.

  • Page 22: 3. System Connection

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 3. System connection 3.1. Usage precautions 1) system should be installed in a clean environment and has a prop temperature and humidity. 2) all of the power switches, plugs, sockets and power cords should be insulated and safe. 3) all ...

  • Page 23: 4. Control Operations

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 4. Control operations 4.1. Front panel button control users can control modular matrix switcher 8x8 (with audio) rapidly and directly with its front panel buttons. Here is a brief operation guide to front panel buttons. Format: “input c...

  • Page 24

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 4.2. Ir remote control with the ir remote, modular matrix switcher 8x8 (with audio) could be controlled remotely. As the function buttons on the ir remote are the same with the ones on the front panel, the ir remote shares the same oper...

  • Page 25

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) no. Pin function 1 n/u unused 2 tx transmit 3 rx receive 4 n/u unused 5 gnd ground 6 n/u unused 7 n/u unused 8 n/u unused 9 n/u unused when modular matrix switcher 8x8 (with audio) connects to the rs232 port of a computer with control s...

  • Page 26

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) communication protocol: baud rate: 9600; data bit: 8; stop bit: 1; parity bit: none. Command description feedback /*type; inquire the models information. Modular88a /%lock; lock front panel buttons. System locked! /%unlock; unlock front...

  • Page 27

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) save[y]. Save the present operation to the preset command [y]. [y] ranges from 0 to 9. Save to f8 recall[y]. Recall the preset command [y]. Recall from f8 v: 01->001 a: 01->001 … … clear[y]. Clear the preset command [y]. Clear f8 pwon. ...

  • Page 28

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 0911%. Restore factory default. All i/o connection will be restored to straight through: 1->1, 2->2, …; saved operation status will remain the same. 4i-hs user/i/[x]:02xx%; set the brightness of input [x] to xx, xx=00~99 02xx% user/i/[x...

  • Page 29

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) user/o/[x]:0813%; set the resolution of output [x] to 1280x1080p @60hz resolution out03 1920x1080p user/o/[x]:0824%; set the resolution of output [x] to 1024x768 @60hz resolution out03 1024x768 user/o/[x]:0826%; set the resolution of ou...

  • Page 30

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) user/i/[x]:0617%; restore input [x] to factory default. 0617% user/i/[x]:0606%; auto-adjust vga signal 0606% user/i/[x]:0698%; update software 0698% 4i-vg user/i/[x]:0622%; set the signal of input channel [x] to vga. 0622% user/i/[x]:06...

  • Page 31

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) user/i/[x]:0629%; set the resolution of input [x] to 1920x1080, 1080p 0629% user/i/[x]:0620%; set the resolution of input [x] to 1920x1200, wuxga 0620% user/i/[x]:0621%; set the resolution of input [x] to 1600x1200, uxga 0621% user/i/[x...

  • Page 32

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) examples: 1、 transfer signals from an input channel to all output channels: [x]all. Example: send “3all.” to transfer signals from the input 3 to all output channels. 2、 transfer all input signals to corresponding output channels respec...

  • Page 33

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) it will show the detail switch information when it switch. Example: when switch 1->2, it will feedback “av01 to 02”. 6、 transfer signals from an input channel to corresponding output channel: [x]#. Example: “5#.” to transfer signals fro...

  • Page 34

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 4.4. Tcp/ip control (optional) 4.4.1. Control modes tcp/ip default settings: ip is 192.168.0.178, gateway is 192.168.0.1, and serial port is 4001. Ip & gateway can be changed as you need, serial port cannot be changed.  controlled by s...

  • Page 35

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) step1. Connect the tcp/ip port of the modular matrix switcher 8x8 (with audio) to ethernet port of pc with twisted pair. Step2. Set the pc ’s network segment to the same as the modular matrix switcher 8x8 (with audio). Do please remembe...

  • Page 36

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 2) after connect successfully, we can enter commands to control the modular matrix switcher 8x8 (with audio), as below: 4.4.3. Tcp/ip configuration type the designed website 192.168.0.178:100 in your browser. Enter correct username and ...

  • Page 37

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) in this interface, you can: change website display language modify network settings: go to internet settings -> wan upgrade tcp/ip module: go to administration -> upload program -> select program file -> start upgrading reboot the devic...

  • Page 38: 5. Specification

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 5. Specification 5.1. Main unit control parts serial control port rs232, 9- female d connector configurations 2 = tx, 3 = rx, 5 = gnd installation rack mountable front panel control buttons options tcp/ip control general power supply 10...

  • Page 39

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 5.2.2. 4i-ds & 4o-ds 4i-ds 4o-ds input 4 dvi output 4 dvi input connector female db24+5/hdmi output connector female db24+5/hdmi input level t.M.D.S. 2.9v~3.3v output level t.M.D.S. 2.9v~3.3v input impedance 75Ω output impedance 75Ω gen...

  • Page 40

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 5.2.4. 4i-hs & 4o-hs 4i-hs 4o-hs input 4 hdmi 4 analog audio output 4 hdmi 4 analog audio input connector 19-pin type-a female 3-pin pluggable terminal block output connector 19-pin type-a female 3-pin pluggable terminal block power con...

  • Page 41

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 5.2.6. 4i-va video audio input 4 vga input 4 stereo audio input connector female 15 pin hd input connector 3-pin pluggable terminal block input level 0.5 ~ 2.0vp-p cmrr >90db @20hz ~ 20khz input impedance 75Ω input impedance >10kΩ gener...

  • Page 42

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 5.2.8. 4i-ss input output input 4 sdi output 4 sdi input connector female bnc output connector female bnc general audio signal sdi, hd-sdi, 3g-sdi color depth 8, 10, 12 bit transmission distance 1080p≤100m max resolution 1080p bandwidth...

  • Page 43

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) input impedance 100 Ω (differential) frequency response 20hz～20k hz 4o-uh video output audio output output 4 hdmi output 4 stereo output connector female hdmi output connector 3.5mm stereo audio connector min.～max. Level t.M.D.S. 2.9v~3...

  • Page 44

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) transmission distance 1km (single mode transmission, using single mode optical module and om3 single mode fiber cable) 300m (multi-mode transmission, using single/ multi mode optical module and om3 multi-mode fiber cable) data rate 10.2...

  • Page 45

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) standard edid& hdcp management compliant with hdcp 1.4; support manual edid management 5.2.13. Au88 (modular matrix switcher 8x8 (with audio) only) input output input 8 stereo output 8 stereo input connector 5-pin pluggable terminal blo...

  • Page 46

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 6. Troubleshooting & maintenance problems causes solutions output image with ghost bad quality of the connecting cable try another high quality cable impropriate image setting of the displayer adjust corresponding image settings output ...

  • Page 47

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) connectors well. Cannot control the device by control device (e.G. A pc) through rs232 port wrong rs232 communication parameters type in correct rs232 communication parameters. Broken rs232 port send it to authorized dealer for checking...

  • Page 48: 7. After-Sales Service

    Kanexpro hdmmx88-4k series modular matrix switcher (with audio) 7. After-sales service if there appear some problems when running modular matrix switcher 8x8 (with audio), please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the war...