KanexPro MXHD1616A User Manual

Manual is about: HDMI 16x16 Matrix Switcher

Summary of MXHD1616A

  • Page 1

    1 tm mxhd1616a hdmi 16x16 matrix switcher.

  • Page 2: Table of Contents

    2 table of contents 1) introduction 2 2) specifications 3 3) unit layout 5 4) external connection 5 5) operation of the edid management 7 6) operation of the control panel 8 7) using the remote control 10 8) communication protocol & command codes 11 9) troubleshooting & maintenance 13 10) warranty 1...

  • Page 3

    3 features: • fast-switch up to 16 x hdmi/dvi sources to 16 x hd displays • supports bandwidth up to 10 2 gbps • built-in edid & hdcp internal management • hdcp 1 3 complaint • supports 3d pass-through • supports high speed hdmi specifications (deep color, lip sync, and hd lossless audio) • supports...

  • Page 4

    4 2 specifications video inputs/output: input: 16 x hdmi output: 16 x hdmi input connector: hdmi 1 3 input level: t m d s 2 9/3 3v input empedance: 75 ohms output connector: hdmi 1 3 output level: t m d s 2 9v/3 3v output impedance: 75 ohms video general: gain: 0db bandwidth: 340mhz (10 2 gbps) vide...

  • Page 5

    5 3 unit layout 4 external connection rs-232 communication port • besides the front control panel, the hdmi matrix switcher can be controlled by far-end control system or through the ethernet control via the rs-232 communication port • with the rs-232 port, the hdmi matrix switcher can be controlled...

  • Page 6

    6 connection with computer • when the switcher connects to the com1 or com2 of the computer with control software, users can control it by that computer • to control the switcher, users may use the public com software please refer the details in communi cation protocol and command codes pin function...

  • Page 7

    7 5 operation of the edid management mxhd matrix series switchers are manufactured with full edid management built-in the database the edid management can automatically handshake, or through manual exchange and factory restore edid automatic handshake: • the mxdv matrix switcher has built-in edid da...

  • Page 8

    8 6 operation of the control panel edid management by rs232 commands • when you need to refresh the edid data of the mxhd1616a matrix switcher, we can manually exchange the edid data by sending the rs232 command “edidmon ” (please notice the text- transform, and the dot in behind ) • when the “edidm...

  • Page 9

    9 “all ” • the button to transfer one input channel to all output channels • example: to transfer input1 to all outputs • operation: press buttons in this order: “1”, “all” “though” • the button to transfer input to the corresponding output • example: to transfer input 2 to output 2 • operation: pre...

  • Page 10

    7 using the remote control • with the infrared remote controller, the matrix switcher can be controlled remotely the function buttons on the remote controller are the same with the ones on the front control panel; the remote controller shares the same control operation and command format with the co...

  • Page 11

    11 8 communication protocol & command codes command types syst em co m m an d o pe rati on co m m an d /*type; inquire the models information. /%lock;l ock the keyboard of the control panel on the matrix. /%unlock;u nlock the keyboard of the control panel on the matrix. /^version; /: message on;t ur...

  • Page 12

    12 note: 1 [x1], [x2], [x3] and [x4] are the symbols of input or output channels ranged according to the model of the matrix switcher if the symbols exceed the effective range, it would be taken as a wrong command 2 in above commands, “[”and “]” are symbols for easy reading and do not need to be typ...

  • Page 13

    9 troubleshooting & maintenance 1) when the output image in the destination device connected to the hdmi matrix (mxhd1616a) has ghost image, such as the projector output with ghost image, please check the projector’s setting or try another high quality hdmi cord 2) when there is a color loss or no v...

  • Page 14

    Brea, california kanexpro com mpn: hd8pspm 7 warranty a. Limited warranty kanexpro™ warrants that (a) its products (the “product”) will perform greatly in agreement with the accompanying written materials for a period of 12 months (1 full year) from the date of receipt and (b) that the product will ...

  • Page 15

    15 tm brea, california kanexpro.Com.