Sp-hdcat1x4 usermanual hdmi1x4distributionamplifierw/cat5e/6outputs upto394ft.(120meters).
Kanexpro sp-hdcat1x4 2 1. Introduction: the kanexpro sp-hdcat1x4 is a 1x4 hdmi splitter with one transmitter and four receivers set amplifier that, enables hdmi or dvi signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard hdmi or dvi cables. When conn...
Kanexpro sp-hdcat1x4 3 5. Panel description: 6. Connection and operation: • network cable: follow ieee-568b 1. Orange/white 5. Blue/white 2. Orange 6. Green 3. Green/white 7. Brown/white 4. Blue 8. Brown • connection: hdmiextendertx receiver.
Kanexpro sp-hdcat1x4 4 • connectioninstruction 1).Connecthdmiinputwithhdmioutputofsourcedevice. 2).Connectirblasterextensioncabletotheirextenderoutport. 3).Connectcat5e/6cablebetweentransmitterandreceiver 4).Connecthdmioutputofhdmiextenderrxtohdmiinputofhdtvandsetthetvsource inputtocorrecthdmiinputc...
Kanexpro sp-hdcat1x4 5 q: tv display “please check the tx input signal”? A:1）please check if there is an hdmi signal input of tx. 2）try to connect the signal source directly to display device to see if there is signal output from source device or change the signal source, hdmi cables and try again. ...
