KanexPro VGAEXTX8 Setup Manual - Transmitter
3
Power
Output 8
Output 7
Output 6
Output 5
Output 4
Output 3
Output 2
Output 1
Input
Power
GAIN
PEAK
VGA Output
VGA Input
VGA Output
4
Unit Layout & Description
1)
Power Switch
a Powers the unit on/off
2)
Power LED
a LED will be active when unit is powered on
3)
Video/Audio Input
a Connect to VGA source (TV, Monitor, Projector, etc) using a VGA 15 pin Male to Male cable for video and
3 5mm Stereo Male to Male cable for audio
4)
Video/Audio Out
a Connect to VGA display (TV, Monitor, Projector, etc) using a VGA 15 pin Male to Male cable for video
and 3 5mm Stereo Male to Male cable for audio
5)
Cat5e/6 Output
a. Connect to the Cat5e/6(UTP) input on the Receiver unit
6)
DC/5V Connector
a Connect the 5V Switch Splitter power supply to this port
Transmitter
Front
1
2
Power
Output 8
Output 7
Output 6
Output 5
Output 4
Output 3
Output 2
Output 1
Input
Power
GAIN
PEAK
VGA Output
VGA Input
VGA Output
3
4
5
1
Receiver
Output
Input
Power
GAIN
PEAK
VGA Input
VGA Output
VGA Output
Output
Input
Power
GAIN
PEAK
VGA Input
VGA Output
VGA Output
Back
Front
1)
Video/Audio Output
a Connect to VGA display (TV, Monitor, Projector, etc) using a VGA 15 pin Male to Male cable for video
and 3 5mm Stereo Male to Male cable for audio
2)
Power LED
a LED will be active when unit is powered on
3)
Cat5e/6(UTP)input
a Connect to the Cat5e/6 output on the Transmitter
4)
DC/5V Connector
a Connect the 5V Switch Splitter power supply to this port
5)
Gain
a. Rotary dial used for adjusting the brightness on the displays
6)
Peak
a. Rotary dial used for adjusting the skew for long cable runs
3
4
1
2
Output
Input
Power
GAIN
PEAK
VGA Input
VGA Output
VGA Output
Side
5
6
Back