Hillcr hillcr hillcr hillcr hillcrest est est est est owners manual please read carefully.
Damage in shipment by u.P.S.: 1. You must notify u.P.S. Immediately so that they can inspect the damage. U.P.S. Will return the damaged merchandise to us. 2. Notify our company as to the nature of the damage, parts missing, etc. We will then assume responsibility for disposition of the damages with ...
If you’re online, be sure to visit our owners cyberclub. It’s a secure site designed specially for kangaroo owners, and you’ll need a password to enter. To sign up, point your browser to http://www.Kangaroogolf.Com/welcome.Htm you’ll find additional technical information, parts lists, and maintenanc...
The control cable plug aligns with the receptacle by a lug and corresponding notch arrangement. Always handle the plug when connecting or disconnecting the control cable. Pulling on the wire can cause damage. Also, keep the plug and receptacle clean. Cable plug and receptacle hillcrest assembly fron...
Drawlatch operation hillcrest assembly.
Control description normal operation: 1. Check desired speed setting. 2. Turn on-off switch to off. You can vary the speed control to suit your own pace. 3. To stop, turn on-off switch to off. There’s no need to change the speed control when stopping and re-starting. The speed control has a very wid...
Graphics for pinned on wheels.
Hillcrest wheel removal the wheels on your hillcrest are designed to be easily removed and replaced. Each wheel is held in place on the end of the axle by a spring-loaded retaining tab located on the inner side of the wheel. This retaining tab fits into a groove formed on the axle by the space betwe...
Important warning: never tow your hillcrest. Any damage due to failure to observe this warning is not covered by your warranty. Graphics for quick remove wheels.
Technical specifications motor: high torque, 2-pole armature/permanent magnet, 12-volt dc. Drive train: double reduction, sealed maintenance-free self- lubricating gear drive with differential and direct-drive hubs. Controls: all solid-state motor control, 45 amp capacity, all circuitry under overcu...
Owner maintenance don’t oil it! The hillcrest motorcaddie has been designed and manufactured to be essentially maintenance free. The drive assemblies need no adjustment and are self-lubricating. The control system is well de- signed, with quality parts and full protection circuitry. There are no use...
Warranty kangaroo products co. Limited warranties your kangaroo motorcaddie is manufactured to rigorously upheld specifications necesary for this type of product in order to provide dependable service to the golfer. It incorporates years of research and development involving construction and evaluat...
