Kangaroo MOBILE DESKTOP User Manual - page 8
Kangaroo by InFocus
User Guide
User Guide
InFocus Corporation
Page 8 of 11
Using your iPad to control your Kangaroo Mobile Desktop
STEP-1: Download OSLinx for Windows
STEP-2: Download OSLinx for iPad
Download OSLinx for Windows to your Kangaroo Mobile
Desktop computer.
To download OSLinx for Windows:
a) Visit
b) Select Manuals & Downloads
c) Click OSLinx for Windows.
Download and install OSLinx for iOS onto your iOS
device (presently only available for iPad).
To download OSLinx for iOS:
a) Visit the App Store on your iOS device.
b) Search for OSLinx
c) Download and install the app onto your device.
STEP-3: Open OSLinx on Both Devices
STEP-4: Trust & Connect
Open the OSLinx application on each device.
Connect your iOS device to the Kangaroo Mobile
Desktop using your (Lightning or 30-pin) USB cable.
Tap “Trust this Computer” on your iOS device.
Once a trusted link is established your iOS device will
negotiate the connection with the Kangaroo Mobile
Desktop and display the following screens:
USB Connection Established
OSLinx Connection Established
Troubleshooting the OSLinx Connection with your iPad
Depending on the Display Configuration settings in Windows certain systems may experince an error, “Extended display is
not found in the connected PC’.
This error indicates that the OSLinx application is unable to make a connection with a primary or extended display device,
and is known to occur when the iOS device is configured (in Windows) as a Secondary Display.
Perform the following steps to correct this problem:
1) Connect your iOS device to the USB port of the Kangaroo Mobilde Desktop.
2) Connect a HDMI monitor to your Kangaroo Mobile Desktop.
3)
Click Start , select Settings
> System
4)
Click the dropdown menu titled, Multiple Displays, and select Extend these displays.