Kanguru autoloader 100 100 target cd duplicator kanguru autoloader 100 user’s guide copyright 2003, all rights reserved. This manual applies to v1.16 or later versions of the kanguru autoloader 100 1.
Kanguru autoloader 100 please be aware of the following points before using the kanguru autoloader 100 copyright© 2003, kanguru solutions. All rights reserved. All other brand or product names are trademarks of their respective companies or organizations. Kanguru solutions will not be held responsib...
Kanguru autoloader 100 table of contents: 1. Introduction 2. Reminders 3. Installation and set up 3.1 inspecting the shipment for damage 3.2 unpacking and verifying shipment contents 3.3 setting up 3.4 loading discs 3.5 unloading accepted discs 3.6 unloading rejected discs 4. Main functions 4.1 copy...
Kanguru autoloader 100 1. Introduction thank you for purchasing the kanguru autoloader 100 from kanguru solutions! The kanguru autoloader 100 is a stand-alone unattended duplicator that requires no computer connection during operation. It consists of a robotic mechanism that will automatically move ...
Kanguru autoloader 100 3.3 setting up please use the following instructions to setup your kanguru autoloader: 1. Remove all parts from the carton. 2. Place the reject bin in the unit 3. Attach the sides of the disc hopper by snapping the two sides into place. 4. Attach the base plate to the left sid...
Kanguru autoloader 100 3.4 loading discs to properly load the disc hopper, place the first disc level on the two white wheels. You can then drop any additional discs into the hopper once the first disc is stable. The hopper can initially hold up to 100 discs, but you can add more discs while the sys...
Kanguru autoloader 100 4. Main functions 4.1 copy this function will start the duplication process if a master cd and blank cds are present. Follow the lcd screen shots below to begin. 1. Copy press “enter” to select the copy function 1. Copy autoloader will begin to read the master disc read master...
Kanguru autoloader 100 [emulate] processing [emulate] processing >> [emulate] the lcd will return to 1.Copy after emulate is emulate ok done. 4.3 erase this function will erase cdrws if they have previously been written to. All cds must be blank in order to begin the duplication process. Follow the ...
Kanguru autoloader 100 [autoloader] use the up and down arrows to switch between yes modes. (yes or no) 4.5 test this function will replicate the autoloader’s mechanics. Follow the lcd screen shots below to begin. 5. Test [test] the test function will continue until there are no processing blank cds...
Kanguru autoloader 100 q2. A disc has jammed during operation: o please check if the disc is standard size (120mm) o please check to see if the discs are level and not warped. O make sure your autoloader is on a level surface while in use. O do not force a disc tray or the robotic arm to remove a di...
Kanguru autoloader 100 7.2 specifications • cdrw: 52x 24x 52x cd burner • cd-rom: 52x cd-rom • support formats: audio cd, cd-rom (mode1/mode2), cd-rom/xa (mode2, form1/form2), vcd, cd-i, photo cd, cd extra, cd-r, cd-rw • write speed: cd-r 700mb data ~ 3 minutes (20 cds per hour) • hopper capacity: 1...
