Kanguru Combo Hub User Manual - 4. Installation Procedure:

4. Installation Procedure: 

1.)  For ease of use you may want to print out this manual.  

2.)  Please make sure your computer is turned off while installing the PCI card. 

3.)  Remove the side paneling to your PC to gain access to you motherboard and PCI 

card slots. 

4.)  Insert the PCI card into an available PCI slot.  You should be able to feel the card 

snap into place.  Please make sure the card is securely in place before moving on. 

5.)  Next insert the 3-port hub into either a 5.25” bay or 3.5” bay, and connect the 

cable to the pins on the PCI card.  You will notice the pins and connector can only 

connect in one position.  Please make sure the pins are lined up properly with the 

connecting before trying to connect the two. 

6.)  After making sure everything is connected properly you can now power on your 

computer. 

7.)  A found new hardware wizard will appear you your desktop letting you know that 

the new PCI card has been detected and is looking for drivers.  Before moving on 

please insert the provided drivers CD. 

8.)  Press “Next” until you get to the screen that allows you to specify a location.  

Here select the CD-ROM drive for a location to search. 

9.) Your computer will then finish the installation process and you may have to 

restart your system for the changes to take place.  

Warranty 

This product carries a 1-year warranty from the date of purchase. Any claims for loss or 

damage must be made to carrier directly. Claims for shipping errors should be reported 

to Kanguru Solutions within three (3) business days of receipt of merchandise.

Tech Support 

If you experience any problems installing your KanguruCombo hub or have any technical 

questions regarding any of our products, please call our tech support department. Our tech 

support is free and available Monday thru Friday, 9am to 5pm EST.  

Call 1-508-663-0105 or 

Visit our website at www.KanguruSolutions.com