Kano NetCOR Quick Start Manual

Connect the included

ethernet cable into the

NetCOR RJ-45 network

connection, and plug the

other end into the net-

work switch or router.

NetCOR™ Network Storage System

PART ONE:  Connecting Your NetCOR

™

NAS

STEP 1:  Network Cable

Connect the included AC

power adapter cord into

your NetCOR power con-

nection and the other

end into an AC wall out-

let.

STEP 2:  POWER CABLE

Connect the USB data

cable into the NetCOR

USB port and the other

end into your external

USB hard disk storage for

additional data storage

capacity.

OPTIONAL:  USB DATA

NetCOR

™ 

NAS SYSTEM (REAR)

Switch the power switch

to the ON postion.

STEP 3:  POWER UP

!!!  

Kano Technologies recommends that

you plug your NetCOR into a surge protec-

tor or UPS to prevent damage to the sys-

tem from power surges.

!!!  

Note-  The NetCOR will NOT power on

after the  power switch is in the ON pos-

tion.  Additional steps are required.  See

PART TWO of Quick Start Guide

!!!  

NetCOR USB data ports are not com-

patible with USB hubs or devices attached

to USB hubs

.

Press and release the

power button on the

front of the NetCOR sys-

tem.  Once the green

power LED stops flashing,

the NetCOR has finished

booting.  

STEP 4:  POWER ON

!!!  

If the power LED does not stop flash-

ing, please refer to the trouble shooting

section of your manual.

NetCOR STORAGE SYSTEM: 

WINDOWS PC    /   MACINTOSH

XP / NT / 2000 / 2003

OS  X  -  10.x

QUICK START GUIDE