Dn1628-0806 p700wls ioprox receiver installation manual.
Dn1628-0806 warning! This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. © 2008 tyco international ltd. And its respective companies. All rights reserved...
Installation manual p700wls ioprox receiver dn1628-0806 table of contents system overview .......................................................................................................1 inventory 1 technical specifications .......................................................................
Installation manual p700wls ioprox receiver dn1628-0806.
Installation manual p700wls ioprox receiver dn1628-0806 1 system overview the p700wls ioprox receiver unit is designed to interface with an access control panel card reader port using the wiegand protocol or the kantech extended secure format (xsf). The ioprox receiver can read from a distance of up...
Installation manual p700wls ioprox receiver dn1628-0806 2 technical specifications p700wls ioprox receiver p72wls/p74wls transmitters power: 12-24 vdc power: cr2032 3v lithium battery, included (3 year average lifetime) current: 50ma (stand-by) 100ma (peak) operating temperature: 0°c to 70°c (32°f t...
Installation manual p700wls ioprox receiver dn1628-0806 3 installing the p700wls ioprox receiver global coverage when global coverage of a large area is required, there should be a sufficient number of receivers to give overlapping coverage of receiving patterns. Use the sw terminals if the receiver...
Installation manual p700wls ioprox receiver dn1628-0806 4 data path selector settings the receiver unit provides for field selectable pins jp2 located near the center of the board (figure 1) receiver terminal block location the receiver terminal block is removable. (refer figure 1) it can be mounted...
Installation manual p700wls ioprox receiver dn1628-0806 5 s1 receiver configuration placing the dip switches in the on or off position determines which specific button on the multi-button transmitter will activate the receiver and wiegand format to be transmitted to the control panel. (see table 1 b...
Installation manual p700wls ioprox receiver dn1628-0806 6 receiver wiring diagrams figure 2 typical installation and two receivers connected to one port installations.
Installation manual p700wls ioprox receiver dn1628-0806 7 testing the receivers pcb led indicators all leds are located on the pc board, inside the box. Figure 3 leds location y4: flashes if the transmitter encryption code does not match the receiver configuration, and will not operate the receiver....
Installation manual p700wls ioprox receiver dn1628-0806 8 receiver relay the receiver relay activates for one second when a valid button on the transmitter triggers the receiver. The relay on the receiver can be used for testing purposes by adding an audible or visual device to confirm the receiver ...
Installation manual p700wls ioprox receiver dn1628-0806 9 testing the transmitters operating instructions the following instructions can be used for both models (2 or 4 buttons) 1. On the key tag transmitter, press for one (1) second the button you programmed earlier to activate the receiver. A red ...
