Kantech KT-1 Installation Manual - Compatibility
Compatibility
The KT-1 is compatible with all EntraPass Editions v6.02 and higher:
• EntraPass Special Edition
• EntraPass Corporate Edition
• EntraPass Global Edition with a Multi-site Gateway, Global Gateway, or a KT-NCC
Network Communications Controller
IP Communication Configuration
Web Configuration Page: The Web Configuration Page can be used to verify and
configure the IP settings of the KT-1. Refer to the System Architecture section of
this guide for further details.
KT-Finder: The KT-Finder is a stand-alone application that can be used to verify and
configure the IP settings of the KT-1. Refer to the System Architecture section of
this guide for further details.
One Door/Two Readers (Entry/Exit)
The KT-1 is a full onboard door access controller.
Example of KT-1 Setup with T.REX
© Copyright, 2016, all rights reserved
12