Kanto YU2 User Manual - Introduction
3
Supporting your digital lifestyle
™
Introduction
Thank you for choosing YU2 Powered Speakers, designed by Kanto in Canada . YU2 outputs 25W
RMS per channel into 4 Ohm speakers, for remarkably bold and clean sound . Excellent sensitivity
and frequency response provide deep thumping lows and clear, scintillating highs, surprising for
speakers of this size . YU2 is a remarkably flexible computer speaker system that can accept two
input sources and connect to a subwoofer for enhanced low frequency effect (LFE) .
We recommend you read all instructions carefully before using the system, and keep them for
future reference . Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product .
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping . After unpacking, please check for any damage . It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately . You can also
call Kanto directly at 1-888-848-2643 or email support@kantoliving .com .
What’s In the Box?
YU2 Active
Speaker
YU2 Passive
Speaker
AC/DC
Adapter
User
Manuals
x3
x8
Self-Adhesive
Rubber Feet
3 .5mm AUX
cable (10’)
Speaker
Wire (10’)