Kaon KCF-200CO User Manual - page 5
After you scan and memorize all the digital channels, you can organize them
in different lists,
you can erase certain channels, lock them…
In case you see this message scrambled channel or a black picture, it is
possible that these channels are encoded by the cable operator and for their
decoding you will need decoding card. For such case look for
information’s from your
cable operator.
Adding a channel in a list
Press MENU and then choosethe option Edit
Channel List. In the next window you will see
two columns. In the left column are all the
channels that you have and in the right column
all the channels that you will choose. To put the
channels in a list press the red button on the
remote control after pressing you will see a table
with different suggestions for lists in which you
can put the channels.
If you want to lock certain channel all you need
to do is choose LOCK from the list and then
press OK. Afterwards choose the channel that
should be locked and press OK. With this the
channel is transferred to the right column where
are shown the locked channels. After you fill the
list press EXIT and you will get message with the
next content Do you want to save? If you are
sure that you have finished with the changes
press OK.
To watch the channels from the locked list you
will have to enter your pin.