Kappa WMR-3500 Operation Manual - page 9
Manual is about: Wireless Socket Receiver Module
of
11
Each clamp has 2 terminals.
When the wires need to be looped, for example to another wall socket.
Install the wires shown in the below diagram.
airing:
Receiver module can pair with up to 6 different remote controls at any one time as it has a maximum
of 6 memories.
This receiver is not to be controlled by “Code Switch System” remote transmitters.
Only compatible to “Self Learning System” remote transmitters.
Pairing using LEARNING MODE:
1.
On the receiver module press the ‘Learn’ button once, LED with flash. It is now in learning
mode.
P