1 2/4 channel amplifiers a150.2 dd a400.4 d owners manual & installation guide.
Introduction congratulation on your new purchase of a kaption audio amplifer. Kaption audio amps are built with the most advanced technology today with superior sound quality to deliver a superb listening experience. We have dedicated ourselves for years in order to offer the best possible quality l...
Features • class “a/b” amplifier • nickel plated high current drain power terminal & speaker terminals • nickel plated rca inputs & outputs • soft remote on / off circuitry • full mosfet circuitry • variable input level control • built-in variable hi/low pass filter • built-in variable bass boost • ...
Functions batt+ rem gnd power input 14 12 17 15 13 + r ch - - - + l ch + fuse speaker bridge fig 1. Panel layout for 2 channel class ab amplifier 3.
Batt+ gnd rem power input fuse - - - - + + - + ch 3 ch 4 bridge + ch 2 ch 1 + - + speaker 14 12 17 15 13 bridge fig 2. Panel layout for 4 channel class ab amplifier 1. Protection indicate led • lights red when the short protection operates 2. Power indicate led • lights blue when the power turns on....
12. Gnd: ground • when making a connection to the vehicle chassis, use the proper size ring terminal to suit the ground cable and fasten it to the vehicle with a threaded bolt and nut. Good grounding forms the basis for the audio quality of the entire system. The best solution is to connect the grou...
21. X-over control • a variable x-over control having a range from 40hz to 250hz. This is used in conjunction with the x-over switch in the low pass or high pass position. Power supply connections fuse bridge speaker power input + - + ch 1 ch 2 rem gnd batt+ + - - to head unit remote fuse or circuit...
Connect the amplifier’s positive (+) power lead via an external fuse directly to the battery; the fuse must be as close as possible to the positive (+) terminal. Use a rating that equals the total current consumption at full output of all amplifiers in the system. Adding an external fuse will protec...
Wiring diagram bridge speaker + l ch + - - - r ch + - + - + - + fuse fuse bridge speaker + - + ch 1 ch 2 + bridge ch 4 ch 3 + - + + - - - - fig 4. Two or four speaker connection / 2 ohms minimum + r ch - - - + l ch + speaker bridge fuse - + - - - - + + - + ch 3 ch 4 bridge + ch 2 ch 1 + - + speaker ...
Specifications model a150.2 a400.4 rated output power @ 4ohms 75w x 2 100w x 4 rated output power @ 2 ohms 100w x 2 150w x 4 signal to noise ratio > 90 db > 90 db frequency response 20hz~50khz 20hz~50khz low pass filter 40~4000 hz 40~4000 hz crossover slope 12db octave 12db octave subsonic filter 30...
Kaption audio 399 four valley dr, unit 27 concord, ontario, canada l4k 5y7 1-866-kaption (527-8466) 3333 391 1 www.Kaptionaudio.Com.
