Kapture KPT 860 User Manual - page 5
2.2 INSERTING A MEMORY CARD
Ensure that your KPT-860 is powered off. With the lens facing away from you remove the protective
capontherearofthecamerausingyourfingernailtopryoffthecapfromthetop.InsertyourMicro
SDcard(notincluded)intotheslotontherearofthecamerawiththetextfaceoftheMicroSD
cardfacingup.Useyourfingernailtopressthecardintotheslotuntilaclickisheardandreplace
the protective cap.
NOTE:
1. Do not insert or remove a Micro SD card while your KPT-860 is
powered up. This may damage your Micro SD card.
2. Please use class 10 or higher rated Micro SD cards, 16GB or
above (up to 128GB).
3. Please format the Micro SD card before initial use (in FAT 32
format if you are using a computer to format your Micro SD card).
2.3 REMOVING A MEMORY CARD
EnsurethatyourKPT-860ispoweredoff.UsingyourfingernailpresstheSDcarduntilaclickis
heard and release. The card should eject from the slot.
GETTING STARTED
8
2.4 MOUNTING YOUR KPT-860
Please read through all mounting instructions before attempting to install the KPT-860. It is
recommended that you install the KPT-860 behind your rear view mirror. Once you have mounted
your camera using your preferred method it is recommended that you run the power cable
around your windscreen under your vehicles interior trim using the included tool and cable clips.
Ifyourvehiclehassidecurtainairbags,pleasebeverycarefulwhenrunningcablesalongyour
vehicles windows. Please ensure that you do not run the cables past any of these air bags as this
canpreventtheairbagsfromdeployinginanemergency.WhenmountingtheSnapshotButton,
please avoid attaching this to any of your vehicles airbags.
2.5 INSTALLING YOUR KPT-860 MAGNETIC MOUNT
1. ToinstalltheMagneticMount,ensurethe3M
mounting plate is securely attached to the
magnetic mount.
2. CleanwindshieldwithanAlcoholWipe,making
surethereisnodust,moisture,oroilonthe
desired mounting point of the windscreen.
3.Removetheprotectivefilmontheadhesive
pad and place the Magnetic Mount in the
desired position on your windscreen.
4. Firmly press and hold the Magnetic Mount
against your windscreen for 60 seconds to
ensure that the adhesive sets.
9