Operators manual before using this product. Warning: to reduce the risk of injury, the user must read and understand the save this manual for future reference version: a+sc21-sc24 rotary surface cleaner professional pressure washer accessories operation instruction and parts list manual size 21 inch...
Congratulations on the purchase of your new rotary surface cleaner! You can be assured this cleaner was constructed and designed with quality and performance in mind. Each component has been rigorously tested to ensure the highest level of acceptance. Your rotary surface cleaner is equipped with a h...
- the rota ry surface cleaner is capable of accepting a maximum permissable rating of 212°f. Operating temperature under normal operating conditions is 175°. When using in a hot water application, do not touch or direct discharge stream at persons. Be cautious of hose fittings as surface temperature...
- seek emergency medical care if the spray appears to have penetrated the skin! Do not treat as a simple cut! Be prepared to tell a physician exactly what kind of cleaning agents you were using by reading the material safety data sheet provided with your detergent. - never use any solvents or highly...
Specifications unpack the machine and make sure that it is complete and not damaged, in case it is not complete or damaged, do not use the machine and consult your dealer. For reasons of packaging or transport, some accessory components can be supplied loose. In this case they must be assembled acco...
Rotating bar spray pattern (parallel to bar) nozzle hose swivel housing handle-lower clevis pin bridge pin aluminum support handle-upper clevis pin bridge pin connect socket click click quick plug nozzle selection & installation: 1. Your rotary surface cleaner will come installed with one set of 250...
Risk of injury or damage to machine!! Never operate the unit if it begins to vibrate! Shutdown the unit and tighten the rotating bar, bolts and fittings. Pre-start inspection procedures: 1. Inspect rotary surface cleaner before each use. Tighten rotating bar, bolts and fittings as needed. 2. Ensure a...
Risk of injury or damage to machine!! Never operate the unit if it begins to vibrate! Shutdown the unit and tighten the rotating bar, bolts and fittings. Connect socket click click quick plug shut-down: 1. Turn the pressure washer off. 2. Turn the water supply off. 3. Squeeze the trigger gun to reli...
Product exploded and parts list handle assembly available repair parts and kits 1. Hose, a+sc21-sc24 8.753-584.0 2. Coupler, ¼” plug, female 8.707-136.0 4. ¼” quick connect 8.750-696.0 kit, spray gun , a+sc21-sc24 8.921-834.0 3. Screw m6x30 4. ¼” quick connect 5. Sleeve 6. Trigger gun kit, handle as...
Product exploded and parts list 10 11 12 13 14 13 15 16 17 18 19 20 21 22 23 17 18 19 24 25 26 27 28 13 kit, handle mounts, a+sc21 - sc24 8.921-841.0 10. Clevis pin 11. Clevis ring 14. Handle support kit, swivel clamp, a+sc21 - sc24 8.921-842.0 12. Clamp ring 13. Bolt kit, caster assembly, a+sc21 - ...
Product exploded and parts list swivel assembly 29. Grease nipple 30. Swivel housing 31. O-ring* 32. Compression spring 33. O-ring 34. Bolt 35. Pin 36. O-ring* 37. Back up ring* 38. Stem 39. Bearing retainer, small 40. O-ring* 41. Bearing retainer 42. Snap ring 43. Bearing back-up ring 44. Upper bea...
Troubleshooting problem probable cause remedy inadequate cleaning power. Not enough psi from ensure unit produces a minimum pressure washer. 2000 psi. Most effective cleaning range is 2500-4000 psi. Inadequate water supply. Turn water supply completely "on" pressure washer. Ensure unit produces a mi...
Accessories and parts warranty 13 limited minimum 90 day warranty we warrant to the original consumer that each new part and accessory sold by kärcher north america (kna) will be free from manufacturing defects in materials or workmanship in normal service for the duration specified by the original ...
