1. DL manuals
  2. Karcher
  3. Sander
  4. BDS 43/175 C
  5. Operating Instructions Manual

Karcher BDS 43/175 C Operating Instructions Manual

Summary of BDS 43/175 C

  • Page 1

    Warning: this product and accessories may contain a chemical known to the state of california to cause cancer and birth defects or other reproductive harm for more information about this regulation: www.P65warnings.Ca.Gov 86386990-e 06/09/17 polisher floor machine operating instructions (eng) models...

  • Page 2: Warranty Registration

    2 warranty registration thank you for choosing our product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product. To register your product go to: http://warranty.Karcherna.Com/warrantyregistration.Aspx 86386990 operators manual...

  • Page 3

    3 table of contents machine data label . . . . . . . . . . . . . . . . . . . . . . . . 2 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . 3 how to use this manual . . . . . . . . . . . . . . . . . . . 4 safety safety labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5...

  • Page 4

    4 how to use this manual this manual contains the following sections: • how to use this manual • safety • operations • maintenance • suggested spare parts the how to use this manual section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from a...

  • Page 5

    5 safety safety labels note: these drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. Emplacement de l'étiquette de sécurité remarque: ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à ...

  • Page 6

    6 safety important safety instructions when using this machine, basic precaution must always be followed, including the following: read all instructions before using this machine. To reduce the risk of fire, electric shock, or injury: use only indoors. Do not use outdoors or expose to rain. Use only...

  • Page 7

    7 safety consignes de sÉcuritÉ importantes lors de l'utilisation de cette machine, des précautions de base doivent toujours être prises, y compris les précautions suivantes: lire toutes les instructions avant d'utiliser cette machine. Pour réduire le risque d'incendie, d'électrocution ou de blessure...

  • Page 8

    8 safety the following symbols are used throughout this guide as indicated in their descriptions: hazard intensity level there are three levels of hazard intensity identified by signal words -warning and caution and for safety. The level of hazard intensity is determined by the following definitions...

  • Page 9

    9 safety les symboles suivants sont utilisés dans tout ce manuel, tels que décrits ici : niveau d'intensitÉ du danger il existe trois niveaux d'intensité du danger, identifiés par des termes d'avertissement - avertissement, attention et pour votre sÉcuritÉ. Le niveau d'intensité du danger est déterm...

  • Page 10

    10 safety grounding instructions this product is for commercial use only. Electrical: in the usa this machine operates on a standard 15 amp 115v, 60 hz, a.C. Power circuit . The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated ...

  • Page 11

    11 notes 86386990 operators manual - floor polisher.

  • Page 12

    12 operations technical specifications item dimension/capacity/model construction molded ul-recognized pe chassis with heavy- duty rubber bumper, tubular steel adjustable handle with die cast aluminum handle housing motor 1.5hp 115v induction 17”, 20” 1.75 hp 115v 175/300rpm dual speed brush/pad spe...

  • Page 13

    13 operations handle installation the handle must be installed by qualified personnel. Read all instructions thoroughly. The machine is shipped with handle unassembled. La poignée doit être installée par du personnel qualifié. Lisez toutes les instructions attentivement. La machine est livrée avec l...

  • Page 14

    14 operations controls 1. Safety lock – prevents unintended operation of the machine. 2. Switch levers – turns machine on/off. 3. Adjustment handle – allows the handle to be adjusted to a comfortable operating position handle height adjustment note: the handle is in the up, locked position from the ...

  • Page 15

    15 operations machine operation for indoor use only. Pour utilisation à l'intérieur seulement. When using the pad, always keep the machine moving when in contact with the floor. Lorsque vous utilisez le coussin protecteur, gardez toujours la machine en mouvement lorsqu'elle est en contact avec le so...

  • Page 16

    16 maintenance scrub brushes note: all original equipment brushes are equipped with “perform alert©”. This feature will tell the operator when it is time to replace the scrub brushes. “perform alert©” brushes have pre- trimmed bright yellow tufts to indicate the length of a worn out brush. When the ...

  • Page 17

    17 maintenance machine troubleshooting problem cause solution machine will not run circuit breaker tripped in building. Check and reset. Power switch failure test switch for continuity and replace if necessary. Tripped circuit breaker reset. Faulty power cord replace. Fuse in motor blown (dual speed...

  • Page 18

    18 suggested spare parts 86377960 coupling 86000140 brush, 17" nyl. Pol. W/clt.Plt 86283800 brush, 17" nyl.Scrub w/clt.Plt 86000130 brush, 17" mild grit w/clt.Plt 86283710 brush, 17" agg. Malgrit w/c.P 86000110 brush, 17" polypro w/clt. Plt 86283790 brush, 20" nyl.Pol.W/clt.Plt.Sft 86283770 brush, 2...

  • Page 19

    19 notes 86386990 operators manual - floor polisher.