9.800-083.0 model order # model hd 2.8/20 pb 1.575-150.0 bg-282037 hd 2.5/27 pb 1.575-151.0 bg-252737 hd 3.0/30 pb 1.575-152.0 bg-303037 hd 3.7/35 pb 1.575-154.0 bg-373537 hd 3.0/40 pb 1.575-155.0 bg-304037 hd 3.5/32 pb 1.575-156.0 bg-353237 operator’s manual to locate your local kärcher commercial ...
3 contents 9.800-083.0 • rev. 01/08 model number ______________________________ serial number ______________________________ date of purchase ____________________________ the model and serial numbers will be found on a decal attached to the pressure washer. You should record both serial number and d...
9.800-083.0 • rev. 01/08 opera tor’s manu al pressure w asher 4 introduction & important safety information thank you for purchasing this pressure washer. We reserve the right to make changes at any time without incurring any obligation. Owner/user responsibility: the owner and/or user must have an ...
9.800-083.0 • rev. 01/08 5 pressure w asher opera tor’s manu al important safety information risk of explosion: do not spray flammable liquids. Warning warning: flammable liquids can create fumes which can ig- nite, causing property damage or severe injury. Warning: risk of explosion — do not spray ...
9.800-083.0 • rev. 01/08 opera tor’s manu al pressure w asher 6 component identification pump — develops high pressure. Starter grip— used for starting the engine manu- ally. Spray gun — controls the application of water and detergent onto cleaning surface with trigger device. Includes safety latch....
9.800-083.0 • rev. 01/08 7 pressure w asher opera tor’s manu al step 1: attach the handle to the frame of the pressure washer. Note: it may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the frame supports. Step 2: insert the carriage bo...
9.800-083.0 • rev. 01/08 opera tor’s manu al pressure w asher 8 step 1: check engine oil level. Oil level should be level with the bottom of the oil filler neck. Be sure the machine is level when checking the oil level. (refer to the engine's operating manual included with machine.) we recommend tha...
9.800-083.0 • rev. 01/08 9 pressure w asher opera tor’s manu al step 7: turn the engine switch to "on" position. On briggs engines, move the throttle lever to "fast" position, shown on engine as a rabbit. Step 8: pull the starter grip. If the engine fails to start after 2 pulls, squeeze the trigger ...
9.800-083.0 • rev. 01/08 opera tor’s manu al pressure w asher 10 warning: some detergents may be harmful if inhaled or ingested, causing severe nau- sea, fainting or poisoning. The harmful elements may cause property damage or severe injury. Step 1: connect detergent injector to discharge nipple on ...
9.800-083.0 • rev. 01/08 11 pressure w asher opera tor’s manu al shutting down and clean-up step 1: remove detergent suc- tion tube from container and insert into one gallon of fresh water. Slide nozzle forward for low pressure or to connect black detergent nozzle into wand quick coupler. Pull trigg...
9.800-083.0 • rev. 01/08 pressure w asher tr oub leshooting guide 12 problem possible cause solution low operating pressure faulty pressure gauge install new gauge. Insufficient water supply use larger supply hose; clean filter at water inlet. Old, worn or incorrect spray nozzle match nozzle number ...
9.800-083.0 • rev. 01/08 13 pressure w asher opera tor’s manu al preventative maintenance this pressure washer was produced with the best available materials and quality craftsmanship. However, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular...
Form #9.800-083.0 • revised 01/08 • printed in u.S.A..
