Karcher BT 4220 User Manual - Other Features
EN | 17
EN
Other Features
Reconnection Between
Bluetooth
®
Device and
BT 4220
You can reconnect your paired
Bluetooth
®
device to your speaker easily:
Select the
BT 4220
entry on the
Bluetooth
®
device to reconnect. Any of the 8 previously
connected
Bluetooth
®
devices would be able to reconnect to
BT 4220
when it is powered on
and not connected to any device.
Note:
BT 4220
is able to remember up to 8 paired devices in its memory bank, eliminating the need to
re-pair again should any of these devices connect to
BT 4220
. Should a 9th device be paired to
BT
4220
WKH¿UVWGHYLFHZLOOEHHUDVHGIURPLWVPHPRU\$WDQ\WLPHDPD[LPXPPHPRU\RIGHYLFHV
are being retained.
Toggle Between the Last Two Connected
Bluetooth
®
Devices
You can toggle between devices to enjoy your favorite music from another paired
Bluetooth
®
device
by following these steps to establish connection:
1.
Press the
CONNECT
button once.
2.
LED status indicator goes off and blinks at every 2 second intervall.
3.
Ready to stream music.
Notes:
Ensure that your next paired device’s
Bluetooth
®
feature is on and ready to accept connec-
tions.
While switching from one device to another, short dropouts in the playback may occur. After
a few seconds playback should reutrn to normal.
Return to Default Setting
You can return
BT 4220
to its default settings and erase its memory of paired devices by following
these steps:
1.
Press and hold the
CONNECT
button for 8 seconds while the speaker is on.
2.
A long beep tone is heard. The LED status indicator blinks rapidly.
3.
The memory is now cleared and the speaker is in pairing mode, ready to accept connection
from other
Bluetooth
®
devices.
AUX In for Playback of Other Audio Devices
You can connect the audio output of an external device such as an MP3 player to this unit to listen
WRWKHVRXQGRIWKDWGHYLFHWKURXJKWKHDPSOL¿HURIWKLVPXVLFV\VWHP
3,5 mm audio cable (not included)