Karcher DAB 5000 User Manual - page 27
EN | 27
EN
Digital Radio Menu
While in DAB+ mode you can enter the Digital Radio menu by
pressing the MENU button on the remote control or by pressing
and holding for 2 seconds the /INFO button on the unit.
Navigate through the menu using the arrow buttons on the
remote control or the NAVIGATE knob on the unit. Press the OK
button or the ► button to enter submenus or confirm selections.
Press the ◄ button or the MENU button to return to the previous
menu or exit the menu.
Station List
View the station list.
Full Scan
Do a full scan for available radio stations.
Manual Tune
Manual tune the frequencies.
Prune Invalid
Yes - Deletes all invalid stations from the station list.
No - Cancel and return to the menu.
DRC
High
This function reduces the difference between the loudest and quietest
audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and loud
sounds comparatively quieter.
Note:
DRC only works if it is enabled by the broadcaster for a specific
station.
Low
Off
System Settings
See chapter 10. System Settings Menu
9. FM
1.
Switch the unit on as described previously. It will start in the mode last listened to. Select FM
mode if it isn’t already selected.
2.
Press the ▲/► / ◄/▼ buttons on the remote control or the ▲/TUNING+ / ▼/TUNING- buttons
on the unit to manually search for a frequency. Each press adjusts the frequency by 0.05 MHz.
3.
To automatically search for the next available radio station, press the OK button.
Radio Station Presets
This unit enables you to store up to 10 of your favorite radio stations.
To store and recall radio station presets the steps are the same as described in the chapter 8. DAB+.
Note: Due to software limitations the preset list in FM mode will show the frequency, not the station
name.
RDS (Radio Data System)
This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-
dio station together with the audio broadcast. This text information can include name of the radio sta-
tion, name of the current program or song, news headlines, etc. and may vary from station to station.
When you have tuned into a radio station that is broadcasting RDS information, the RDS symbol will
be shown in the display:
To cycle through such RDS information press the INFO button.
Notes:
•
Not all radio stations transmit RDS information. In such cases the unit will not show any informa-
tion.
•
RDS information broadcast may vary from station to station.