Karcher G 2500 HT Operator's Manual - Assembly Instructions

5

ASSEMBLY INSTRUCTIONS

Step 1

Attach  the  handle  to  the  frame  of  the

pressure washer. Align holes, insert bolts,

and tighten with knobs.

Step 2

Attach the gun/hose storage handle.

Step 3

Fasten the rubber grommets in the nozzle

holder.

Step 4

Place  the  quick  connect  nozzles  in  the

nozzle holder.

Step 5

Attach the wand to the spray gun.

Step 6

Pull  the  spring-loaded  collar  of  the  wand

back to insert your choice of quick connect

nozzle.

Step 7

Release the collar and push the nozzle until

the collar clicks.

DANGER

High pressure in nozzle area.

Risk of injury caused by improper locked

nozzle.

• Make  sure  you  hear  a  ‘click’  when

inserting the nozzle tip into the wand.

• Pull the nozzle to make sure it is seated

properly before operating your unit.

Step 8

Attach the high pressure hose to the spray

gun.