1. DL manuals
  2. Karcher
  3. Pressure Washer
  4. G 2600 PC
  5. Operator's Manual

Karcher G 2600 PC Operator's Manual

Other manuals for G 2600 PC: User Manual
Manual is about: Karcher Pressure Washer User Manual

Summary of G 2600 PC

  • Page 1

    9.800-499.0 01/10a g 2600 pc english 2 español 16 français 31.

  • Page 2

    2 english model overview 3 important safety instructions 4 assembly instructions 6 operating instructions 8 using the accessories 9 working with detergents 10 taking a break 11 shutting down & clean-up 11 winterizing and long-term storage 12 maintenance instructions 12 cleaning tips 12 troubleshooti...

  • Page 3

    3 english model overview 1 handle 2 trigger gun 3 trigger gun safety lock 4 high pressure hose 5 gas tank 6 spray wand 7 dipstick 8 water inlet with garden hose connector 9 quick connect high pressure outlet 10 detergent suction tube with filter 11 quick connect nozzles 12 water intel filter for engin...

  • Page 4

    4 english important safety instructions read the operating instructions of the engine ■ manufacturer before start-up and follow the safety instructions carefully. Warning when using this product basic precautions should always be followed, including the following: read all the instructions before us...

  • Page 5

    5 english caution when connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be connected directly to the public drinking water supply. This is to ensure that there is no feedback of chemicals into the water su...

  • Page 6

    6 english step 1: attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. Step 2: mount the gun/hose storage handle. Step 3: mount the nozzle holder with enclosed nylon rivets to the handle. Step 4: place the quick connect nozzles in the nozzle holde...

  • Page 7

    7 english step 8: pull back the springloaded collar at the spray gun and insert the high pressure hose. Release the collar and push the high pressure hose until the collar clicks warning high pressure in quick connect area. Risk of injury caused by improperly locked high pressure hose. Make sure you...

  • Page 8

    8 english caution engine shipped without oil. Before starting engine, fill with oil. Do not over-fill. Do not run the engine with a high or low oil level as this can cause engine damage. If you have further questions regarding the engine, please refer to the engine manual included with the unit. Step ...

  • Page 9

    9 english quick connect nozzles using the accessories the color-coded quick connect nozzles provide a wide array of spray widths from 0° to 65° and are easily accessible when placed in the convenient nozzle holder. 0° spray angle = red nozzle for particularly stubborn accumulation of grime. Not reco...

  • Page 10

    10 english working with detergents detergents can only be applied with the black detergent nozzle. Step 1: install the black detergent nozzle for detergent application (will work at low pressure only). Step 2: fill a container (not included) with kärcher de- tergent. Place the filter end of detergent...

  • Page 11

    11 english taking a break ..five minutes or more shutting down & clean-up step 1: move the engine stop switch to the off position. For engine details see engine manual. Step 2: release trigger and engage gun safety lock. Step 1: remove detergent suction tube from container and insert into 1 gallon of...

  • Page 12

    12 english pump mainenance the pump on your kärcher pressure washer does not require maintenance. Any attempts to service or alter the pump may damage your pressure washer and void your product warranty. Carry out maintenance tasks for the engine according to the specifications provided in the operat...

  • Page 13

    13 english (with or without detergent) . Pre-rinse furniture and surrounding area with fresh water. If using detergent, apply to surface at low pressure. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If needed use special wash brush attachment (not inclu...

  • Page 14

    14 english caution remove the spark plug cable to prevent ac- cidental ignition of the engine before making any repair. Troubleshooting symptom possible cause solution engine will not start no gasoline fill gas tank choke is not in the correct position. Slide choke lever out to closed position. Wate...

  • Page 15

    15 english symptom possible cause solution pump is noisy. Pump is sucking air. Check that hoses and fittings are air tight. Turn off machine and purge pump by squeezing trigger gun until a steady flow of water emerges through the nozzle. Water leaks from pump (up to 10 drops per minute is permissible)...